Toshiba 50CT User Guide - Page 163
LCD Flexible Cable, Replacement Procedures
![]() |
View all Toshiba 50CT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
4.15 LCD Flexible Cable 4 Replacement Procedures 4.15 LCD Flexible Cable Removing the LCD Flexible Cable To remove the LCD flexible cable, follow the steps below and refer to Figure 4-25. 1. Turn the computer off. Disconnect the AC adapter and optional units from the computer. 2. Remove the battery, display mask, FL inverter board, LCD module, power switch board, and AccuPoint board as described in Sections 4.2 and 4.10 through 4.14. 3. Turn the Display Assembly upside down and remove one silver M2x3 screw which secures the LCD flexible cable to the top cover. Remove the tape and the plastic cover over the LCD flexible cable connected to the right side hinge. 4. Remove one M2.5x5 screw which secures the left side hinge to the LCD cover. 5. Carefully remove the LCD flexible cable from the display assembly. Be careful not to cut the screw terminal area on the cable. Figure 4-25 Flexible cable removal 4-32 Libretto 50CT/70CT Maintenance Manual
![](/manual_guide/products/toshiba-50ct-user-guide-4be2e26/163.png)