Toshiba 50CT User Guide - Page 68
Executing the Diagnostic Test, Connect the I/O adapter to the computer. Next
View all Toshiba 50CT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
3 Tests and Diagnostics 3.2 Executing the Diagnostic Test 3.2 Executing the Diagnostic Test Toshiba MS-DOS is required to run the Diagnostics Program. To start the Diagnostics Program follow these steps: 1. Connect a wraparound connector to the I/O adapter printer port and RS-232C port. Connect the I/O adapter to the computer. Next, connect the FDD and insert the diskette containing the test program. 2. Turn the computer on to execute the test program and the test menu will display. The following menu displays: TOSHIBA personal computer xxx DIAGNOSTICS version X.XX (c) copyright TOSHIBA Corp. 19XX DIAGNOSTICS MENU : 1 - DIAGNOSTIC TEST 2 - HARD DISK FORMAT 3 4 - HEAD CLEANING 5 - LOG UTILITIES 6 - RUNNING TEST 7 - FDD UTILITIES 8 - SYSTEM CONFIGURATION 9 - EXIT TO MS-DOS 0 - SETUP NOTE: To exit the DIAGNOSTIC TEST MENU, press the Esc key. If a test program is in progress, press Ctrl + Break to exit the test program or press Ctrl + C to stop the test program. Libretto 50CT/70CT Maintenance Manual 3-3