Toshiba 50CT User Guide - Page 70
Tests and Diagnostics, Executing the Diagnostic Test, TEST LOOP, ERROR STOP
View all Toshiba 50CT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
3 Tests and Diagnostics 3.2 Executing the Diagnostic Test 4. Select the option you want to execute and press Enter. The following message displays: SYSTEM TEST XXXXXXX xxx DIAGNOSTIC TEST VX.XX [Ctrl]+[Break] ; test end [Ctrl]+[C] ; key stop SUB-TEST : XX PASS COUNT: XXXXX WRITE DATA: XX ADDRESS : XXXXXX ERROR COUNT: XXXXX READ DATA : XX STATUS : XXX SUB-TEST MENU : 01 - ROM checksum 02 03 04 - Fan ON/OFF 05 06 07 - DMI read 08 - DMI write 99 - Exit to DIAGNOSTIC TEST MENU NOTE: The menu displayed by your computer may be slightly different from the one shown above. 5. Select the desired subtest number from the subtest menu and press Enter. The following message displays: TEST LOOP : YES Error Stop : YES Select YES for TEST LOOP to set the test to run continuously until it is halted by the user. Select NO to return to the main menu after the test is complete. Select YES for ERROR STOP to stop the test program when an error is found and display the operation guide on the right side of the display screen as shown below: ERROR STATUS NAME [[ HALT OPERATION ]] 1: Test end 2: Continue 3: Retry Libretto 50CT/70CT Maintenance Manual 3-5