Toshiba 50CT User Guide - Page 149

Display Assembly, Replacement Procedures, CAUTION, Installing the Display Assembly

Get Toshiba 50CT PDF manuals and user guides View all Toshiba 50CT manuals
Add to My Manuals
Save this manual to your list of manuals

Page 149 highlights

4.7 Display Assembly 6. Lift up to remove the display assembly. 4 Replacement Procedures CAUTION: Be sure that the flexible cable has been disconnected from PJ3 on the system board before removing the display assembly. An attempt to forcibly remove the display assembly when the flexible cable is still connected to PJ3 may result in a broken flexible cable. Figure 4-14 Display assembly removal Installing the Display Assembly To install the display assembly, follow the steps below and refer to Figures 4-14 back through 4-11. 1. Connect the display flexible cable to PJ3 on the system board. 2. Place the display assembly onto the base. 3. Secure the metal cover with two thin-head M2.5 screws. 4. Close the display, turn the computer upside down, and secure the display with five M2x14 silver screws. 5. Install the keyboard, optional memory module, HDD, optional PC card, and battery as described in Sections 4.6 back through 4.2. 4-18 Libretto 50CT/70CT Maintenance Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
4.7
Display Assembly
4
Replacement Procedures
4-18
Libretto 50CT/70CT Maintenance Manual
6.
Lift up to remove the display assembly.
CAUTION
: Be sure that the flexible cable has been disconnected from PJ3 on the
system board before removing the display assembly.
An attempt to forcibly
remove the display assembly when the flexible cable is still connected to PJ3 may
result in a broken flexible cable.
Figure 4-14
Display assembly removal
Installing the Display Assembly
To install the display assembly, follow the steps below and refer to Figures 4-14 back through
4-11.
1.
Connect the
display flexible cable
to
PJ3
on the system board.
2.
Place the display assembly onto the base.
3.
Secure the
metal cover
with
two thin-head M2.5 screws
.
4.
Close the display, turn the computer upside down, and secure the display with
five
M2x14 silver screws
.
5.
Install the keyboard, optional memory module, HDD, optional PC card, and battery as
described in Sections 4.6 back through 4.2.