Toshiba 50CT User Guide - Page 145
Keyboard, Replacement Procedures, Removing the Keyboard
View all Toshiba 50CT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
4.6 Keyboard 4 Replacement Procedures 4.6 Keyboard Removing the Keyboard To remove the keyboard, follow the steps below and refer to Figure 4-10. 1. Turn the computer off. Disconnect the AC adapter and any optional units from the computer. Remove the battery as described in Section 4.2. 2. Release the keyboard brace at six points by lifting it from right to left. Remove the keyboard brace. 3. Remove one M2x4 screw that secures the keyboard. NOTE: The keyboard brace and M2x4 screw may have already been removed in Section 4.5, Optional Memory Module. 4. Raise the keyboard toward the display to access the keyboard cable. 5. Remove two M2x3 silver screws from the keyboard straps on the right and left. 6. Disconnect the flexible cable from PJ6 and remove the keyboard. Figure 4-10 Keyboard removal 4-14 Libretto 50CT/70CT Maintenance Manual