Tripp Lite PDU3VSR6L2130 Owner's Manual for SNMPWEBCARD 9332CE - Page 17

3. Web Console continued 3.8 Preferences continued 3.8.1 Preferences > Network continued SMTP The email settings are used to define a remote email relay server to use to send emails from the system. These settings also indicate what items to include in email notifications. From Address This is the address that the email will be sent from. The default is [email protected]. Subject This is the information to be used as the "Subject" line in the message. The default is "PowerAlert Notification". Include Triggering Event This is a flag to indicate if information about the triggering event should be included in the email message if it is available. Values are: • Yes Include the data in the email message. • No Do not include the data in the email message. Figure 3-29: SMTP Preferences Server Name This defines the email relay server address information used for sending out email messages. If this is blank, email messages can still be sent, but will use a direct connection to the recipients' email server. If using direct connection, there must be a valid DNS server defined and the DNS server must have a valid entry that points back to the card and is visible from the contacts destination server. Port This defines the port of the email relay server. This only is used if the Server Name is also specified. The default is 25. Authentication Login Name This is the login to use if authentication is required by the email relay server. It is not used if direct email is being used. Authentication Password If authentication is required by the email relay server, this is the password for the authentication login name. If an Authentication Login Name is specified, then the Authentication Password must also be provided. Include Device This is a flag to indicate if the device that the event occurred on should be included in the email message if it is available. Values are: • Yes Include the data in the email message. • No Do not include the data in the email message. Include Host This is a flag to indicate if the host address for the event that occurred should be included in the email if it is available. Values are: • Yes Include the data in the email message. • No Do not include the data in the email message. Include Location This is a flag to indicate if the device location for the event that occurred should be included in the email if it is available. Values are: • Yes Include the data in the email message. • No Do not include the data in the email message. Digest MD5 Authentication Supported This indicates if PowerAlert should authenticate with the email relay server using Digest MD5 Authentication. CRAM MD5 Authentication Supported This indicates if PowerAlert should authenticate with the email relay server using CRAM MD5 Authentication. Login Authentication Supported This indicates if PowerAlert should authenticate with the email relay server using Login Authentication. Plain Authentication Supported This indicates if PowerAlert should authenticate with the email relay server using Plain Authentication. 17