Tripp Lite PDU3VSR6L2130 Owner's Manual for SNMPWEBCARD 9332CE - Page 37

4. Telnet/SSH Console continued 4.1 Device Menu continued 4.1.5.3 Ramp/Shed Settings This menu allows the user to modify the ramp and shed settings for the entire device in one operation. This is to ensure that the user can make all of the changes necessary before a ramp/shed synchronization is started. The menu will prompt the user to make sure that all of the changes have been made before saving. A message will be displayed that indicates if a ramp/shed synchronization is in progress and further updates will not be allowed. Updates of other variables will also be blocked when synchronization is in progress. This will be indicated on the menus impacted. Ramp/Shed Settings Summary Menu -------- Ramp/Shed Settings Load 1 2 3 Description Ramp Action Delay After Delay Remain Off 0 Remain Off 0 Remain Off 0 #- Ramp/Shed Settings A- Apply Changes X- Loads M- Return to Main Menu Refresh Menu Shed Action After Delay Remain On Remain On Remain On Delay 0 0 0 The following shows the sequence of automatic data prompts when '1' is entered from the above summary menu and the resulting summary menu when done. >> 1 -------- Ramp/Shed Settings -------- Ramp Action Selection Current Value: Remain Off 1- Remain Off 2- Turn On After Delay >> 2 -------- Ramp Delay Current Ramp Delay = 0 Enter an integer less than 65536 for Ramp Delay >> 10 -------- Shed Action Selection Current Value: Remain On 1- Remain On 2- Turn Off After Delay >> 2 -------- Shed Delay Current Shed Delay = 0 Enter an integer less than 65536 for Shed Delay >> 20 -------- Ramp/Shed Settings Load Description 1 2 3 Ramp Action After Delay Turn On Remain Off Remain Off Delay 10 0 0 Shed Action After Delay Turn Off Remain On Remain On Delay 20 0 0 37