Tripp Lite PDU3VSR6L2130 Owner's Manual for SNMPWEBCARD 9332CE - Page 60

4. Telnet/SSH Console continued 4.2 System Configuration continued 4.2.3.2 Local Users This menu is used to define the local users. Local users include SNMP v3 users and SNMP v1/v2c communities which must be defined locally. RADIUS authentication may not be used for SNMP access. There are a total of 12 users that may be defined with 5 default users being created initially. Available slots will be identified in the user summary table with the name/community of "User Not Defined." The following is the data that is used to define the users. Not all data applies to all user types and will be identified accordingly. User Detail Menu SNMP Protocol : User Name : Facility Permissions : Outlet Realms : ACL IP Address : ACL IP Mask : Password : Auth Password : Idle Timeout in Minutes : Session Expiration in Min : SNMPV3 localadmin DEFAULT FACILITY = Read Write : : : : localadmin localadmin 0 0 1- Name 2- Outlet Realm Permissions 3- SNMP Protocol 4- ACL IP Address 5- ACL IP Mask 6- Password 7- Auth Password 8- Idle Timeout in Minutes 9- Session Expiration in Minutes A- Apply Changes X- Security M- Return to Main Menu Menu Data SNMP Protocol The SNMP Protocol is the first attribute to be defined for a user since it will need to be used to determine what data items need to be populated for the user. The valid values are: • None This user does not have any SNMP access allowed. • SNMP v1 This user is a SNMPv1 community definition. Only access through SNMP is allowed for this user. • SNMPv2c This user is a SNMPv2c community definition. Only access through SNMP is allowed for this user. • SNMPV3 This user has SNMPv3 access as well as access through any of the other view interfaces. Username (SNMPv3 and No SNMP Access Users) This is the username. It is a string value which is 8 to 32 characters long with no spaces. Community (SNMPv1 and SNMPv2c Users) This is the SNMP community name. It is a string value which is 8 to 32 characters long with no spaces. Permission This defines the access permissions for the user. Facilities The facilities are ways of grouping permission for related pieces of data. A user may have access to all or only a subset of the data. The options for each facility are Read Only, Read/Write and No Access. Default The default facility setting defines the data access that a user has for any data that does not have another explicit facility assignment. When adding a new user, the default permissions are set to No Access. Security This is the security data such as local user and RADIUS hosts definitions, and authentication method. By default, security access is given to only the localadmin user. Contacts This facility allows users to view or add contacts in the address book. System Settings This includes all of the system and network settings. By default, access is given to localadmin and localmanager. Info This is additional system wide information. Currently this facility covers the IPV4 and IPV6 Address definitions. This facility provides Read Only access. 60