Tripp Lite PDU3VSR6L2130 Owner's Manual for SNMPWEBCARD 9332CE - Page 35
Load Configuration
![]() |
View all Tripp Lite PDU3VSR6L2130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
4. Telnet/SSH Console continued 4.1 Device Menu continued 4.1.5 Loads To access the load menus, the user must have at least Read access to the DEVICE LOADS and DEVICE STATUS facilities. Additionally, a user may be able to update Loads options by accessing outlet realms. You can control the outlets of a managed device by selecting the load plugged into it and clicking the desired [On], [Off] or [Cycle] control. Each load bank consists of one or more outlets. You can use the "Description" field to label the banks for easy reference. The main control buttons affect all outlets at once. Warning! The load controls start or stop the flow of electricity to your device's outlets. Make sure you know what equipment is connected to each load bank before attempting to use these controls! Check the outlet labels and/or test the load banks by plugging a circuit tester or small light into each outlet and observing the effects of the controls. 4.1.5.1 Load Configuration Menu Data Edit Description Use this menu to enter custom labels for load banks. This can be used to help identify equipment quickly and easily before using the controls to cycle the bank ON or OFF. Change Realm Assigning a realm to an individual outlet or group of outlets creates a logical grouping that can be used to assign user access. Turn Load On/Off This menu controls the state of the outlet. Cycle Load This command can be used to turn the load OFF and back ON in a single command. Change Ramp Action Select if the outlet should stay OFF or turn ON when ramp actions are triggered. Change Ramp Delay If setting the ramp action to turn ON, this command sets the delay before the action occurs. Change Shed Action Select if the outlet should stay ON or turn OFF when shed actions are triggered. Change Shed Delay If setting the shed action to turn OFF, this command sets the delay before the action to occur. Load Group: Ramp Settings Action: Delay: Turn On After Delay 2 Shed Settings Action: Delay: Turn Off After Delay 3 1- Edit Description 2- Change Realm 3- Turn Load Off 4- Cycle Load 5- Change Ramp Action 6- Change Ramp Delay 7- Change Shed Action 8- Change Shed Delay X- Load Menu M- Return to Main Menu Refresh Menu >> x Loads Menu 35
![](/manual_guide/products/tripp-lite-srcoolnet-owners-manual-snmpwebcard-9332ce-d2bf68b/35.png)