Tripp Lite PDU3VSR6L2130 Owner's Manual for SNMPWEBCARD 9332CE - Page 36

4. Telnet/SSH Console continued 4.1 Device Menu continued 4.1.5.2 Load Groups The Load Groups menu is not available for all devices. Devices that support loads groups must have 2 or more loads and provide a mechanism for updating multiple loads with a single command. If the device does not support load groups, then this menu will not be available. Load Groups Summary Menu -------- Device Load Groups Menu ##| State | Name | Outlets | 01 On load group one 1 3 5 7 #- Load Group 0- New Load Group X- Device Main Menu M- Return to Main Menu Refresh Menu Load Group Detail Menu -------- Load Group Detail Menu Load Group Name : load group one Description : odd loads State : On Load : 1,3,5,7 1- Load Group Name 2- Description 3- Select Loads 4- Turn Group Loads Off 5- Cycle Group Loads A- Apply Changes D- Delete X- Load Groups Menu M- Return to Main Menu Refresh Menu >> x Menu Data Descriptions Load Group Name This is the name of the load group. Description This is the description of the load group. State This is the state of the load group. The valid values are: • On - all of the loads in the group are on • Off - all of the loads in the group are off • Mixed - some loads in the group are on and some are off Load This is a comma-separated list of loads in the group. The loads in the group must be controllable, belong to only one group and must all be from the same device. 36