Tripp Lite PDU3VSR6L2130 Owner's Manual for SNMPWEBCARD 9332CE - Page 70

4. Telnet/SSH Console continued 4.3 Network Configuration continued 4.3.1.1 Host Name This is a character string up to 63 characters to be used as the host name for the SNMPWEBCARD. -------- Host Name Current Host Name = poweralert_0641576753151 Enter a string between 1 and 63 characters for Host Name X- Leave value unchanged M- Return to Main Menu 4.3.1.2 Domain Data Entry Menu This menu is used for setting the domain name associated with the SNMPWEBCARD. -------- Domain Name Current Domain Name = tlsoftwaredev.local Enter a string between 1 and 67 characters for Domain Name X- Leave value unchanged M- Return to Main Menu 4.3.1.3 IPV4 Settings This menu displays current IPV4 settings and allows a user to reconfigure the method, address, subnet mask and gateway of the protocol. -------- IPV4 Settings Menu Data Current IPV4 Address Information Home : eth0 Method : STATIC IPV4 Address : 10.11.0.111 Subnet Mask : 255.0.0.0 Settings On Restart Method : STATIC Address : 10.11.0.111 Subnet Mask : 255.0.0.0 Gateway : 10.0.0.1 1- Method 2- Address 3- Subnet Mask 4- Gateway A- Apply Changes X- IP Configuration M- Return to Main Menu Refresh Menu Method The method used to determine the IPV4 Address associated with the SNMPWEBCARD. The valid values are STATIC and DHCP. The value STATIC means that a user defined fixed IPV4 address will be used by the card. When this option is chosen, the user must also supply the subnet mask and gateway. The value DHCP (Dynamic Host Configuration Protocol) is used to dynamically assign the IPV4 address at initialization. When DHCP option is chosen, the user cannot change the subnet mask or the gateway. Address Only applies when method is STATIC. This is the user-defined fixed IPV4 address. Subnet Mask Only applies when method is STATIC. This is user-defined subnet mask. Gateway Only applies when method is STATIC. This is the user-defined gateway address. 70