Tripp Lite PDU3VSR6L2130 Owner's Manual for SNMPWEBCARD 9332CE - Page 78

4. Telnet/SSH Console continued 4.3 Network Configuration continued 4.3.2.3 Watchdog Settings The values in this menu are optional Watchdog settings that can be defined to verify the availability and accessibility of the network. -------- Watchdog Settings Ping Probe Settings Enabled : No Interval : 3 Tries Before Fail : 3 Primary Address : Secondary Address : NTP Probe Settings Active Interval Tries Before Fail Primary Address Primary Port Secondary Address Secondary Port : No : 3 : 3 : : 125 : : 0 1- Ping Probe Active 2- Ping Probe Interval 3- Ping Probe Tries Before Fail 4- Ping Probe Primary Address 5- Ping Probe Primary Address 6- NTP Probe Enabled 7- NTP Probe Interval 8- NTP Probe Tries Before Fail 9- NTP Probe Primary Address 10- NTP Probe Primary Port 11- NTP Probe Secondary Address 12- NTP Probe Secondary Port A- Apply Changes X- Remote Services M- Return to Main Menu Refresh Menu Menu Data Ping Probe Settings Up to two addresses may be defined to periodically ping to determine the health of the network. • Enabled If yes, the Ping Probe is active. • Interval This setting is used to define how often, in minutes, a ping will be performed. • Tries Before Fail This is the number of times that the ping will be attempted before it is considered to be a failed ping attempt. • Primary Address This is the primary address that will be pinged. • Secondary Address This is the secondary address that will be pinged. NTP Probe Settings This defines up to two addresses that can be sent an NTP request to determine the health of the network. • Enabled If yes, the NTP Probe is active. • Interval This setting is used to define how often, in minutes, an NTP request will be sent. • Tries Before Fail This is the number of times that the NTP request fails before considering the test to be a failure. • Primary Address This is the primary address to send the NTP request. • Primary Port This is the port for the primary address. • Secondary Address This is the secondary address to send the NTP request. • Secondary Port This is the port for the secondary address. 78