Xerox PE120 User Guide - Page 118
Changing the Default Settings, Stop/Clear
UPC - 095205224887
View all Xerox PE120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Changing the Default Settings The copy options, including darkness, original type, copy size, and number of copies, can be set to the most frequently used modes. When you copy a document, the default settings are used unless they are changed by using the corresponding buttons on the control panel. To create your own default settings: 1 Press Menu on the control panel until "Copy Setup" appears on the top line of the display. The first menu item, "Default-Change," appears on the bottom line. 2 Press Enter to access the menu item. The first setup option, "Lighten/Darken," appears on the bottom line. 3 Press the scroll button (W or X) to scroll through the setup options. 4 When the option you want to set appears, press Enter to access the option. 5 Change the setting using the scroll button (W or X). You can also enter the value using the number keypad. 6 Press Enter to save the selection. 7 Repeat steps 3 through 6, as needed. 8 To return to Standby mode, press Stop/Clear. NOTE: While you are setting copy options, pressing Stop/Clear cancels the changed settings and restores their default status. 5.14 Copying