Xerox PE120 User Guide - Page 73
print material without bending it., for the Bypass tray. See for copying and faxing
UPC - 095205224887
View all Xerox PE120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
3 Load the print material with the side to be printed on facing up. 3 For envelopes, load them with the flap side down and with the stamp area on the top left side. NOTES: • If envelopes jam while printing, try reducing the number of envelopes in the Bypass tray. • If you want to print on previously printed paper from the Bypass tray, the printed side should be facing down. 4 Squeeze the width guide and adjust it to the width of the print material without bending it. 5 After loading paper, you need to set the paper type and size for the Bypass tray. See page 2.21 for copying and faxing or page 4.6 for PC-printing. NOTE: The settings made from the printer driver override the settings on the control panel. Paper Handling 3.7
Paper Handling
3.7
3
3
Load the print material
with the side to be printed on
facing up
.
For envelopes, load them with the flap side down and with
the stamp area on the top left side.
N
OTES
:
• If envelopes jam while printing, try reducing the number of
envelopes in the Bypass tray.
• If you want to print on previously printed paper from the Bypass
tray, the printed side should be facing down.
4
Squeeze the width guide and adjust it to the width of the
print material without bending it.
5
After loading paper, you need to set the paper type and size
for the Bypass tray. See page 2.21 for copying and faxing
or page 4.6 for PC-printing.
N
OTE
: The settings made from the printer driver override the
settings on the control panel.