Xerox PE120 User Guide - Page 52
Power Save Mode, Scan Lamp Save Mode, Toll Save, Advanced Fax
UPC - 095205224887
View all Xerox PE120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
To turn the toll save mode off, press Toll Save again. The button backlight turns off and the mode is deactivated. NOTE: Once the toll-saving time is set, the Toll Save button allows you only to enable or disable the toll save mode. To change the time setting, use the Toll Save item in the Advanced Fax menu. See page 7.38. Power Save Mode Power Save mode allows your machine to reduce power consumption when it is not in actual use. You can turn this mode on and select a length of time for which the machine waits after a job is printed before it switches to a reduced power state. 1 Press Menu until "Machine Setup" appears on top line of the display. 2 Press the scroll button (W or X) until "Power Save" appears on the bottom line. Press Enter. 3 Press the scroll button (W or X) to display "On" on the bottom line and press Enter. Selecting "Off" means that the power save mode is deactivated. 4 Press the scroll button (W or X) until the time setting you want appears. The available options are 5, 10, 15, 30, and 45 (minutes). 5 Press Enter to save the selection. 6 To return to Standby mode, press Stop/Clear. Scan Lamp Save Mode Scan Lamp Save mode allows you to extend scan lamp life. The scan lamp under the document glass automatically turns off when it is not in actual use to reduce power consumption and extend the life of the lamp. The lamp automatically wakes up after some warm-up time when you start scanning. 2.26 Getting Started