Xerox PE120 User Guide - Page 129

Available Fax Setup Options Option Description You can select the default fax receiving mode. • In Tel mode, you can receive a fax by picking up the handset of the extension phone and then pressing the remote receive code (see page 7.4). Alternatively, you can press Manual Dial (you can hear a fax tone from the remote machine) and then press Start on the control panel of your machine. • In the Fax mode, the machine answers an incoming call and immediately goes into Receive Mode fax reception mode. • In Ans/Fax mode, the answering machine answers an incoming call, and the caller can leave a message on the answering machine. If the fax machine senses a fax tone on the line, the call automatically switches to Fax 7 mode. • In DRPD mode, you can receive a call using the Distinctive Ring Pattern Detection (DRPD) feature. This option is available only when you set up the DRPD Mode. For further details, see page 7.17. Ring To Answer You can specify the number of times the machine rings, from 1 to 7, before answering an incoming call. Lighten/ Darken You can select the default contrast mode to fax your documents lighter or darker. • Lighten works well with dark print. • Normal works well with standard typed or printed documents. • Darken works well with light print or faint pencil markings. Redial Term Your machine can automatically redial a remote fax machine if it was busy. Intervals from 1 to 15 minutes can be entered. Redials You can specify the number of redial attempts, from 0 to 13. If you enter 0, the machine will not redial. Faxing 7.3