Xerox PE120 User Guide - Page 200
Print Text as Bitmap, Graphic Options, Enter, Stop/Clear, Change the USB Mode to Slow. To do so
UPC - 095205224887
View all Xerox PE120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 200 highlights
Condition Possible cause Suggested solutions Pages print, but are blank. The toner cartridge is defective or out of toner. Redistribute the toner, if necessary. See page 8.7. If necessary, replace the toner cartridge. The file may have blank pages. Check the file to ensure that it does not contain blank pages. Some parts, such as the controller or the board, may be defective. Contact a service representative. The illustrations print incorrectly in Adobe Illustrator. The setting in the software application is wrong. Select Print Text as Bitmap in the Graphic Options window of the Image Options properties and print the document again. An error occurs repeatedly when you are printing with the USB connection. When the USB Mode is set to "Fast," some PC users may experience poor USB communication. Change the USB Mode to "Slow." To do so, follow these steps: 1. Press Menu on the control panel until "Machine Setup" appears on the top line of the display. 2. Press the scroll button (W or X) until "USB Mode" appears on the bottom line and press Enter. 3. Press the scroll button (W or X) to select "Slow." 4. Press Enter to save the selection. 5. Press Stop/Clear to return to Standby Mode. 9.20 Troubleshooting