Xerox PE120 User Guide - Page 49
Speaker, Ringer, Key Sound, and Alarm Sound, Speaker Volume, If necessary, repeat steps 2 through 4.
UPC - 095205224887
View all Xerox PE120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Speaker, Ringer, Key Sound, and Alarm Sound 1 Press Menu until "Sound/Volume" appears on the top line 2 of the display. 2 Press the scroll button (W or X) to scroll through the options. Press Enter when you see the desired sound option. 3 Press the scroll button (W or X) to display the desired status or volume for the option you have selected. You will see the selection on the bottom line of the display. For the ringer volume, you can select "Off," "Low," "Med," and "High." Setting "Off" means that the ringer does not sound. The machine works normally even if the ringer is turned off. 4 Press Enter to save the selection. The next sound option appears. 5 If necessary, repeat steps 2 through 4. 6 To return to Standby mode, press Stop/Clear. Speaker Volume 1 Press Manual Dial. A dial tone sounds from the speaker. 2 Press the scroll button (W or X) until you hear the volume you want. The display shows the current volume level. 3 Press Manual Dial to save the change and return to Standby mode. NOTE: You can adjust the speaker volume only when the telephone line is connected. Getting Started 2.23