Xerox PE120 User Guide - Page 218
Scanning With Your Own Settings
UPC - 095205224887
View all Xerox PE120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 218 highlights
2 Make sure that the USB flash drive is inserted into the USB port in the front of the machine. If necessary, insert the flash drive. See page 10.2. 3 Press Scan-to... on the control panel. The first available menu item, "USB Memory," appears on the bottom line of the display. 4 Press Enter. The display shows the available memory space for about 2 seconds and the first available menu item, "Auto Scan," appears on the bottom line of the display. 5 Press Enter to start scanning. The scanned image is saved on the USB flash drive. 6 When a document is loaded on the document glass, the display shows "Another Page?" on the top line after the page has been scanned into memory. If you have another page, remove the scanned page and place the next page on the glass. Select "Yes" Repeat as necessary. After all of the pages have been scanned, select "No" when the display asks "Another Page?" 7 To return to Standby mode, press Stop/Clear. Scanning With Your Own Settings 1 Load the document face up into the ADF. OR Place a single document face down on the document glass. For details about loading a document, see page 7.6. 2 Make sure that the USB flash drive is inserted into the USB port in the front of the machine. If necessary, insert the flash drive. See page 10.2. 3 Press Scan-to... on the control panel. The first available menu item, "USB Memory," appears on the bottom line of the display. 10.4 Using USB Flash Drive