Xerox PE120 User Guide - Page 75
Tips on Using the Bypass Tray, Specifications on E.6 to avoid paper jams and print
UPC - 095205224887
View all Xerox PE120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
3 Squeeze the width guide and adjust it to the width of the print material without bending it. 3 4 If you want the machine to stack the printed pages on the rear output slot, open the rear door to use the rear output slot. CAUTION: Make sure to open the rear output slot when you print on transparencies. If not, they may tear while exiting the machine. 5 After printing, fold away the paper support extension and close the Bypass tray. Tips on Using the Bypass Tray • Load only one size of print material at a time in the Bypass tray. • To prevent paper jams, do not add paper when there is still paper in the Bypass tray. This also applies to other types of print materials. • Print materials should be loaded face up with the top edge going into the Bypass tray first and be placed in the center of the tray. • Always load only the print materials specified in the Specifications on page E.6 to avoid paper jams and print quality problems. • Flatten any curl on postcards, envelopes, and labels before loading them into the Bypass tray. • When you print on 76 mm x 127 mm (3 x 5 in.) sized media on the Bypass tray, open the rear door to use the rear output slot. • Make sure to open the rear door when you print on transparencies. If not, they may tear while exiting the machine. Paper Handling 3.9