Xerox PE120 User Guide - Page 195

Display Meaning Suggested solutions Memory Dial Full You have tried to add a fax job to the memory when 15 fax jobs have already been saved and the memory for saving memory transmission is full. Wait until some of the job in memory are sent. Or delete low priority delayed jobs. Memory Full The memory is full. Delete unnecessary documents and retransmit after more memory becomes available. Alternatively, split the transmission into more than one operation. [No Answer] The receiving fax machine has not answered after several redial attempts. Try again. Make sure that the receiving machine is operational. NO. Not Assigned The one-touch or speed dial location you tried to use has no number assigned to it. Dial the number manually using the number keypad or assign the number. For storing a number, see "Automatic Dialing" on page 7.19. NO. Not Available You have tried to delete Verify the number to be deleted the number for a delayed and try again. fax job. Or, delete the number after the 9 delayed fax job has been sent. [Non-Xerox] [Cartridge] You have used an unauthorized cartridge. If you use non-xerox cartridge, the machine does not print. You must use a Xerox approved cartridge. [No Paper] Add Paper The paper in the paper tray has run out. Load paper in the paper tray. See page 2.7. Operation Not Assigned You are doing the Add/ Cancel operation, but there are no jobs waiting. Check the display to see if there are any scheduled jobs. The display should indicate them in Standby mode; for example, Delay Fax. [Paper Jam 0] Open/Close Door Paper has jammed in the feeding area of the paper tray. Clear the jam. See page 9.5 and page 9.7. [Paper Jam 1] Open/Close Door Paper has jammed in the Clear the jam. See page 9.8. fuser area. Troubleshooting 9.15