Xerox PE120 User Guide - Page 40
For Network Printing (WorkCentre PE120i only), Turning the Machine On, For Network Printing - network card
UPC - 095205224887
View all Xerox PE120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
For Network Printing (WorkCentre PE120i only) You can attach your machine to a network using an Ethernet cable (UTP cable with RJ.45 connector). The WorkCentre PE120i has a built-in network interface card. 1 Make sure that both the machine and the computer are turned off. 2 Plug one end of the Ethernet cable into the Ethernet network port on your machine. 3 Plug the other end of the cable into a network LAN connection. NOTE: After connecting the machine, you need to configure the network parameters on the control panel. See System Administration Guide. Turning the Machine On 1 Plug one end of the supplied three-pronged electrical cord into the AC socket on the machine and the other end into a properly grounded AC outlet. 2.14 Getting Started