Yamaha ELB-02 ELB-02_Owners Manual - Page 125

6 Repeat steps 1 through 4 above to set additional numbers in the NOTICE The Registration Shift Registration order. Up to 400 steps with 80 Registrations (16 setting will be Registrations x 5 Banks) can be memorized. automatically saved to the Registration data when you switch to another display. 7 After settings, move the cursor to the top position with DATA CONTROL dial, then press the Right Footswitch as you play the While data is being saved, a "" mark appears at the top left of the display indicating that the Electone. Registration data is Each press of the Right Footswitch selects Registrations according to the order currently being saved. Do not turn the power off while you've specified. If you've inadvertently advanced the shift setting in the middle the save operation is in of your performance, use DATA CONTROL dial to move the cursor back to the progress, or without switching to another correct position. display, otherwise the data will be lost. Move the cursor to the desired point with the [C] and [D] buttons or DATA CONTROL dial, then insert or delete the desired number by using the [A] and [B] buttons. NOTE Registration data cannot be added or deleted when the cursor position is at the "TOP" (found at the lower left of the screen) after inputting the number. Add or delete the data after moving the cursor by rotating the DATA CONTROL dial clockwise. Move the cursor position Data Entry Position: Highlighted cursor indicates the current data entry position. If you want to move the cursor to the left, press the [C] button or turn the DATA CONTROL dial counter-clockwise. If you want to move the cursor to the right, press the [D] button or turn the DATA CONTROL dial clockwise. NOTE Up to five Registration numbers can be displayed at once in the LCD; however, screen scrolling is enabled when four or more Registration numbers are input. Turn the DATA CONTROL dial counterclockwise to scroll back toward the beginning. Registration Memory 5 Insert: Use the [A] button. This is for initially entering a Registration number to a blank space in the Registration row. To enter a number, press the desired Registration Memory button, then press the [A] "INS." button. The entered Registration number will appear in the Registration row. After using [A] "INS." button to enter Registrations, the cursor can be moved among the numbers. Insert can also be used to insert a Registration number just before the current cursor position. To perform the operation, first move the data entry position to a numbered position. Then, press the desired Registration Memory button, and press the [A] "INS." button. The new Registration number is inserted at the cursor position and all other numbers to the right of the cursor are moved to accommodate the new numbers. Registration numbers cannot be entered beyond the Registration Shift function's capacity of 400. If the insert operation exceeds this capacity, "INS." in the display will changed to "---" and the operation cannot be executed. Delete: Use the [B] button. To delete the unnecessary number, move the cursor to a numbered position and press the [B] "DEL." button. ELB-02 Owner's Manual 125