Yamaha ELB-02 ELB-02_Owners Manual - Page 86

Rhythm Sequence Rhythm Sequence lets you create your own rhythm compositions, connecting together any of the Electone's existing rhythms as well as original rhythms created on other Electones that have the Rhythm Sequence Program function (such as the ELS series). Although this Electone does not have the full Rhythm Sequence Program function, you can load four rhythm compositions to Sequence numbers [SEQ.1]-[SEQ.4] buttons on the panel for future recall, using the steps below. When the rhythm sequence contains Registration Sequence data or Next Unit data, these data types also can be loaded and played on this Electone. While a rhythm is playing, sequence data in the Registration data cannot be loaded. 1 Insert the USB flash drive that contains the desired rhythm sequence data into the [USB TO DEVICE] terminal. 2 Press the [MDR] button and select the desired Song which 4 contains the Registration data you want to load back to Electone. For details on selecting a Song, see steps 2 and 3 on page 135. Rhythm/Keyboard Percussion Reference Page What is a Song? (page 134) Reference Page Recalling Recorded Registrations (page 154) This is necessary because the rhythm sequence data is stored as part of the registration data in the Song (page 147). 3 Load back the desired registration. If the desired registration is in Unit 1, press the [PLAY/PAUSE] button in the MDR section to load back the Unit 1 registrations. If the desired registration is in a Unit other than 1, specify the Unit number then load back the Unit. Now the rhythm sequence data has been loaded to Sequence numbers [SEQ.1]-[SEQ.4] buttons. 86 ELB-02 Owner's Manual