Yamaha ELB-02 ELB-02_Owners Manual - Page 27

3 Basic Operation Selecting the Display Language The LCD display can be shown in two languages, English and Japanese. The default 1 setting is English. Basic Operation 1 Press the [UTILITY] button on the panel. The Utility display appears. Since the language is set in Utility display Page 1, select Page 1 with the page buttons if another page is shown. 2 Press the [A] button to select the corresponding language then successively press the same button to switch the value between Japanese and English. NOTICE The language setting is automatically saved when another display is called up. Make sure to switch to another display before turning the power off. Factory Set (Initializing the Electone) All current settings including Registration Memory (in all banks), Display language and display contrast settings can be deleted at once by the following procedure. Be careful when executing Factory Set, since it erases all your existing data. Always save your important data to a USB flash drive. Note that the operation here does not affect the settings of the wireless LAN settings, which can be initialized on page 200. Reference Page Saving the Registration Data to USB Flash Drive (page 118) Reference Page Initializing Registration Memory (page 120) 1 Turn off the power. ELB-02 Owner's Manual 27