Yamaha ELB-02 ELB-02_Owners Manual - Page 25

2 Using the LCD display Many of the Electone's operations are done from the LCD display. Pressing a button on the panel automatically calls up the relevant function for the corresponding button in the display. Depending on the display that appears, you can conveniently perform various functions and change values/settings by using the [A] - [D] buttons 1 (located at the immediate right side of the LCD) and the DATA CONTROL dial (at the right of the [A] - [D] buttons). Basic Operation Selecting from a list in the display Scroll bar In general (for example, for Voices and Rhythms), there are too many selectable items and menus to all be shown in the display. In such a list display, scroll bar will be shown at the right side of the display. When the scroll bar is shown in the display, you can scroll through the display vertically by rotating the DATA CONTROL dial and select the desired menu. When the marks [6] and [%] are shown at the right side of the scroll bar in the display, you can scroll the display and select the desired one by using the [A] or [D] buttons. Selecting an item and changing its value 1. Select the item 2. Change the value/setting In many displays (other than lists), items or parameters, such as Volume and Reverb, are shown in vertical order, with the corresponding values/settings at the immediate right of the items. In this type of display, you can select (highlight) the item by pressing the corresponding [A] - [D] button (in the example above, the [B] button, which corresponding to the Reverb setting), letting you change the value/setting with the DATA CONTROL dial or by successively pressing the corresponding button (in this case, the [B] button). ELB-02 Owner's Manual 25