Yamaha TYROS Owners Manual - Page 132

Reference Using a Microphone Talk Setting This function is ideal for making announcements between your singing performances. When singing a song, several effects such as reverb, delay and vocal harmony are usually assigned to the MIC Setup. When speaking to your audience, however, these effects may sound disturbing or unnatural. Whenever the [TALK] button is turned on, Delay and Vocal Harmony effects turn off and the amount of reverb lowers automatically. Talk settings can be customized as well, allowing you to add any desired effects to your voice as you speak to your audience. Turning the [TALK] button off automatically recalls the MIC Setup for singing again. Select a menu. MIC SETTING Press the [MIC SETTING] button. If necessary, use the [BACK]/ [NEXT] buttons to call up the Talk Setting display. Settings in the Talk Settings display are automatically saved to Flash ROM when you exit from the display. However, if you turn the power off without exiting from this display, the settings will be lost. • The settings on the Talk Setting display can be saved to the User or Disk drive on the [FUNCTION] → UTILITY → SYSTEM SETUP display as a System Setup file (page 65) For singing VOCAL HARMONY TALK MIC EFFECT For talking VOCAL HARMONY TALK MIC EFFECT Talk Setting Parameters VOLUME PAN REVERB DEPTH CHORUS DEPTH TOTAL VOLUME ATTENUATOR DSP MIC ON/OFF DSP MIC TYPE DSP MIC DEPTH This determines the output volume of the microphone sound. This sets the stereo pan position of the microphone sound. These set the depth of the reverb effects applied to the microphone sound. These set the depth of the chorus effects applied to the microphone sound. This determines the amount of attenuation to be applied to the overall sound (excepting the microphone input) - allowing you to effectively adjust the balance between your voice and the overall instrument sound. This turns the DSP effect applied to the microphone sound ON or OFF. This selects the type of DSP effect to be applied to the microphone sound. This sets the depth of the DSP effect applied to the microphone sound. Microphone Overall Settings Press the [MIC SET- A TING] button. B MIC SETTING C If necessary, press the [BACK]/[NEXT] button to call up the Microphone F Overall Settings display. G H D E Set each parameter. I J Select the row at which the desired parameters are located by pressing the corresponding LCD button. Settings in the Microphone Overall Settings display are automatically saved to Flash ROM when you exit from the display. However, if you turn the power off without exiting from this display, the settings will be lost. I 3BAND EQ EQ (Equalizer) is a processor that divides the frequency spectrum into multiple bands which can be boosted or cut as required to tailor the overall frequency response. The TYROS features a high grade three-band digital equalizer function for the microphone sound. G Hz Adjusts the center frequency of the corresponding band. G dB Boosts or cuts the level of the corresponding band by up to 12 dB. 132 TYROS Owner's Manual 130