Yamaha TYROS Owners Manual - Page 70
Naming Folders/Files, Press the [OK]
View all Yamaha TYROS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Basic Operations - Organizing Your Data Folder/File Operations using the Open/Save Display Naming Folders/Files Folders and files on the installed drives can be freely renamed. You can also name files you've created. The instructions below apply when calling up the Name operation from the Open/Save display. For other cases, go directly to step #5 below. 1 Call up the page (path) of the Open/Save display, where the relevant folders/files are located. 2 Press the [NAME] LCD button (lower [1] button) at the bottom the LCD display. The pop-up window for the Name operation appears at the bottom of the display. To return to the original display, press the [CANCEL] LCD button. 3 Select the desired folder or file to be named. 4 Press the [OK] LCD button (lower [7] button). The pop-up window for entering the name appears at the bottom of the display. To return to the orig- inal display, press the [CANCEL] LCD button. 5 Input the name of the selected folder or file. DATA ENTRY Move the cursor to the desired position by using the [DATA ENTRY] dial. ENTER Press the [OK] LCD button (upper [8] button) to actually enter the new name and return to the original display. Select the desired upper row menu by using the upper LCD [1] - [8] buttons. 1 2 3 4 5 6 7 8 Press the appropriate button, corresponding to the character you wish to enter. Several different characters are assigned to each button, and the characters change each time you press the button. To actually enter the selected character, move the cursor or press another letter-input button. Select the desired lower row menu by using the lower LCD [1] - [8] buttons. Press the [CANCEL] LCD button (lower [8] button) to delete all of the characters on the line at once and return to the original display. Deletes the character at the cursor. Pressing this (lower [6] button) before actual entry of the character adds a special character mark (umlaut, accent, Japanese " " and " ") to the character. Pressing this (lower [6] button) after actually entering a character calls up the miscellaneous character list. Move the cursor to the desired mark by using the [DATA ENTRY] dial, then press the [OK] LCD button (upper [8] button) or [ENTER] button to enter the character and return back to the Name original pop-up window. Call up the ICON SELECT display by pressing the lower [1] button. This lets you change the icon at the left of the file name. Change the type of character by using the [1] up button. G If you select Japanese as the Language in the [FUNCTION] → UTILITY → OWNER display (page 158), the following different types of characters and sizes can be entered: • (kana-kan).... Hiragana and kanji, marks (full size) • (kana Katakana (normal size), marks (full size) • (kana Katakana (half size), marks (half size) • ABC Alphabet (capital and small letters, full size), numbers (full size), marks (full size) • ABC Alphabet (capital and small letters, half size), numbers (half size), marks (half size) • The example pop-up menu shown here appears when the Language parameter is set to "ENGLISH" on the [FUNCTION] → UTILITY → OWNER display (page 158) and the type of characters here is set to "ABC (half size)." G If you've selected a language other than Japanese in the [FUNCTION] → UTILITY → OWNER display (page 158), the following types of characters are available: • CASE Alphabet (capital letters, half size), numbers (half size), marks (half size) • case Alphabet (lowercase letters, half size), numbers (half size), marks (half size) 6 Press the [OK] LCD button (lower [8] button) to actually enter the new name for the item and return to the original display. 70 TYROS Owner's Manual 68