Yamaha TYROS Owners Manual - Page 58
Connecting to a Computer, Initial Setup - 5 compare
View all Yamaha TYROS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Quick Guide Connecting to a Computer By connecting a computer, you can transfer data between the TYROS and the computer via MIDI, and use the computer to control, edit and organize data on the TYROS. For example, you can use the included Voice Editor program to edit the TYROS' custom voices. There is also a special File Utility program that lets you use your computer to manage files in the USER/FD/HD (optional) drive. A type TYROS USB B type USB cable USB USB is an abbreviation for Universal Serial Bus. It is a serial interface for connecting a computer with peripheral devices, and enables much faster data transfer compared to conventional serial port connections. Also, it allows "hot swapping" (connecting peripheral devices while the power to the computer is on). • There are two ways to connect the TYROS to a computer: MIDI cable and USB cable. In the following instructions, we'll use a USB cable. I What you can do with a computer G Manage files in the USER/FD/HD (optional) drive of the TYROS using the File Utility software on the included CD-ROM. File Utility also lets you transmit your TYROS files to a computer, and vice versa. G Create Custom Voices using the Voice Editor software on the included CD-ROM. G Record performance data (1-16 channels) using the TYROS style playback to a computer running sequence software, such as XGworks. After recording, you can edit the data with the computer, then play it back using the TYROS' tone generator. Disconnecting/connecting the USB cable or turning the power off/on may cause the computer operation to hang-up, or may stop the TYROS from functioning properly. Be careful NOT to disrupt the USB connection or turn the power on/off in the following operating conditions. • While the TYROS is recognizing the device or while loading the driver. • While starting or shutting down the operating system. • While computer operation is suspended (with power management controls such as sleep or hibernation). • While a MIDI application is starting. The computer may also hang up and/or the TYROS' functions may stop if you do the following: • Turn the power on/off, or connect/disconnect the cable too often. • Enter the sleep mode while trasmitting the MIDI data, and resume operation. • Disconnect/connect the cable while the TYROS is on. • Turn the TYROS on/off, start the computer, or install driver software while a huge amount of data is being transferred. Initial Setup Instructions are given below in basic outline format. For details, refer to the separate Installation Guide. 1 Confirm the minimum system requirements of the software you wish to use. • For software on the included CD-ROM (such as Voice Editor, File Utility, USB MIDI driver, etc.), refer to the separate Installation Guide. • For other software, refer to the relevant manual or documentation. 2 Connect the computer to the TYROS using a USB cable. 58 TYROS Owner's Manual 56