Yamaha TYROS Owners Manual - Page 84
Vol/attack, Effect/eq, Dsp On/off
View all Yamaha TYROS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Reference Organ Flutes (Sound Creator) I VOL/ATTACK VOL (Volume) RESP (Response) VIBRATO SPEED MODE 4', 2 2/3', 2' LENG (Length) Adjusts the overall volume of the Organ Flutes. The longer the graphic bar, the greater the volume. Affects both the attack and release (page 87) portion of the sound, increasing or decreasing the response time of the initial swell and release, based on the FOOTAGE controls. The higher the value, the slower the swell and release. Determines the speed of the vibrato effect controlled by the Vibrato On/Off and Vibrato Depth above. The MODE control selects between two modes: FIRST and EACH. In the FIRST mode, attack is applied only to the first notes played and held simultaneously; while the first notes are held, any subsequently played notes have no attack applied. In the EACH mode, attack is applied equally to all notes. These determine the attack sound volume of the ORGAN FLUTE voice. The 4', 2 2/3' and 2' controls increase or reduce the volume of attack sound at the corresponding footages. The longer the graphic bar, the greater the attack sound volume. Affects the attack portion of the sound producing a longer or shorter decay immediately after the initial attack. The longer the graphic bar, the longer the decay. I EFFECT/EQ REVERB DEPTH CHORUS DEPTH DSP DEPTH DSP ON/OFF DSP TYPE VARIATION EQ LOW/HIGH See "Effect" on page 136. See "Effect" on page 136. See "Effect" on page 136. See "Effect" on page 136. Determines the DSP effect type to be applied to the Organ Flutes voice by selecting a Category and a type. If any other effect type than "Rotary Speaker" is selected, the [ROTARY SP SPEED] LCD button in the FOOTAGE page will not control rotary speaker speed. Instead, it will have the same effect as the VOICE EFFECT [DSP VARIATION] button. ON/OFF Turns the DSP Variation on or off for the selected organ voice. PARAMETER Indicates the parameter to which the variation is applied depending on the selected DSP type. VALUE Adjusts the degree of the DSP variation parameter. These determine the Frequency and Gain of the Low and High EQ bands. 84 TYROS Owner's Manual 82