Yamaha TYROS Owners Manual - Page 51

Quick Guide Saving and Recalling Custom Panel Setups - Registration Memory Reference on page 128 Since the TYROS is such a sophisticated instrument with such a variety of controls and functions - voice, style, and effect settings, just to name a few - it may be difficult to get a handle on them all. This is where the convenient Registration Memory can help. It allows you to save virtually all panel settings to a Registration Memory setting, and then instantly recall your custom panel settings by pressing a single button. • For a list of Registration Memory setup parameters, refer to the separate Data List. Saving your Panel Setups to a Registration Memory 1 Set up the panel controls (such as voice, style, effects, and so on) as desired. 2 Press the [MEMORY] button in the REGISTRATION MEMORY section. • When a checkmark is entered to the SONG box, the current path (currently selected folder) of the song file can be memorized to Registration Memory. The path for DOC or Disklavier Piano Soft disks, however, cannot be memorized to Registration Memory. If you wish to memorize the path for DOC or Disklavier Piano Soft disks, copy the desired files to the User drive and memorize the corresponding User drive path. MEMORY REGISTRATION MEMORY You can determine whether the settings are to be memorized (on) or not (off) for each parameter group. Enter checkmarks only to those parameter groups you want to be memorized. 1 2 3 4 5 6 7 8 Moves the cursor to the parameter group. You can move the cursor by using the [DATA ENTRY] dial. 3 Press the numbered [REGISTRATION MEMORY] button to which you wish to memorize the panel setup. F G H Cancels the regis- I tration and returns to the previous dis- J play. Enters a checkmark to the selected box (parameter group). Removes the checkmark from the selected box (parameter group). MEMORY REGISTRATION MEMORY The memorized button becomes red. 4 Memorize various panel setups to other buttons by repeating steps #1 - #3. MEMORY • Any panel setup previously memorized to the selected REGISTRATION MEMORY button (indicator is green or red) will be erased and replaced by the new settings. REGISTRATION MEMORY The button to which the panel setup has just been memorized lights red and the button to which the panel setup was previously memorized lights green - the lit buttons indicating that each contains panel setup data. 5 Referring to the instructions on page 52, save the eight memorized buttons as a single Registration Memory bank to the User drive (page 30). • The panel settings memorized via step #1 through #4 are stored temporarily on RAM (page 65). Therefore, they will be lost if you change the Registration Memory bank (page 52) or you turn the power off without executing step #5. 51 TYROS Owner's Manual 49