Yamaha TYROS Owners Manual - Page 95
Record Mode Settings (Setting up for Re-recording), REC START settings, PEDAL PUNCH IN/OUT settings
View all Yamaha TYROS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Reference Song Creator (Digital Recording) Record Mode Settings (Setting up for Re-recording) The following parameters can be set when you call up the REC MODE page in step #4 of the Basic Procedure. Set the parameters below and press the [REC] button to re-record an existing song by following the instructions (from step #2 to end) in the "Quick Guide." I REC START settings... NORMAL FIRST KEY ON PUNCH IN AT Pressing the SONG [START/STOP] button or playing the keyboard with [SYNC START] on starts overwrite recording. The song plays back normally, then starts overwrite recording as soon as you play the keyboard. The song plays back normally up to the indicated Punch In measure, then starts overwrite recording at the specified Punch In measure (set with the corresponding LCD button). I REC END settings... REPLACE ALL PUNCH OUT PUNCH OUT AT This deletes all data following the point at which recording is stopped. The song position at which recording is stopped is regarded as the Punch Out point. This setting maintains all data following the point at which recording is stopped. Actual overwrite recording continues until the specified Punch Out measure (set with the corresponding LCD button), at which point recording stops and normal playback continues. I PEDAL PUNCH IN/OUT settings ...When this is set to ON, you can use Foot Pedal 2 to control the punch-in and punch-out points. While a song is playing back, pressing (and holding) Foot Pedal 2 instantly enables Punch In recording, while releasing the pedal stops recording (Punch Out). You can press and release Foot Pedal 2 as often as you want during playback to punch in/out of overwrite recording. Note that the current function assignment of the sostenuto pedal is cancelled when the Pedal Punch In/ Out function is set to ON. Examples for re-recording depending on the REC MODE settings The TYROS features several different ways you can re-record or replace a specific section of an already recorded channel. The illustrations below indicate a variety of situations in which selected measures in an eight-measure phrase are re-recorded. REC START setting REC END setting NORMAL REPLACE ALL NORMAL PUNCH OUT NORMAL PUNCH OUT AT=006 FIRST KEY ON REPLACE ALL FIRST KEY ON PUNCH OUT FIRST KEY ON PUNCH OUT AT=006 PUNCH IN AT=003 REPLACE ALL PUNCH IN AT=003 PUNCH OUT PUNCH IN AT=003 PUNCH OUT AT=006 Original data 1 2 3 4 5 6 7 8 Start overwrite recording *1 Stop recording *2 1 2 3 4 5 Deleted Start overwrite recording *1 Stop recording *2 1 2 3 4 5 6 7 8 Start overwrite recording *1 Stop overwrite recording/ play original data 1 2 3 4 5 6 7 8 Play back original data Play the keyboard to start overwrite recording Stop recording *2 1 2 3 4 Play back original data Play the keyboard to start overwrite recording 5 Stop recording *2 Deleted 1 2 3 4 5 6 7 8 Play back original data Play the keyboard to start overwrite recording Stop overwrite recording/ play original data 1 2 3 4 5 6 7 8 Play back original data Start overwrite recording Stop recording *2 1 2 3 4 Play back original data Start overwrite recording 5 Stop recording *2 Deleted 1 2 3 4 5 6 7 8 Play back original data Start overwrite recording Stop overwrite recording/ play original data 1 2 3 4 5 6 7 8 *1 To avoid overwriting measures 1 - 2, start recording from measure 3. *2 To stop recording, press the [REC] button at the end of measure 5. Previously recorded data Newly recorded data Deleted data 95 TYROS Owner's Manual 93