ZyXEL NBG6616 User Guide - Page 178

Restart Screen, 25.9 Language Screen

Page 178 highlights

Chapter 25 Maintenance Table 79 Maintenance > Backup/Restore (continued) LABEL DESCRIPTION Upload Click Upload to begin the upload process. Note: Do not turn off the NBG6616 while configuration file upload is in progress. Reset After you see a "configuration upload successful" screen, you must then wait one minute before logging into the NBG6616 again. The NBG6616 automatically restarts in this time causing a temporary network disconnect. If you see an error screen, click Back to return to the Backup/Restore screen. Pressing the Reset button in this section clears all user-entered configuration information and returns the NBG6616 to its factory defaults. You can also press the RESET button on the rear panel to reset the factory defaults of your NBG6616. Refer to the chapter about introducing the Web Configurator for more information on the RESET button. Note: If you uploaded the default configuration file you may need to change the IP address of your computer to be in the same subnet as that of the default NBG6616 IP address (192.168.1.1). See Appendix B on page 198 for details on how to set up your computer's IP address. 25.8 Restart Screen System restart allows you to reboot the NBG6616 without turning the power off. Click Maintenance > Restart to open the following screen. Figure 123 Maintenance > Restart Click Restart to have the NBG6616 reboot. This does not affect the NBG6616's configuration. 25.9 Language Screen Use this screen to change the language for the Web Configurator. Select the language you prefer and click Apply. The Web Configurator language changes after a while without restarting the NBG6616. NBG6616 User's Guide 178

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241

Chapter 25 Maintenance
NBG6616 User’s Guide
178
Note: If you uploaded the default configuration file you may need to change the IP
address of your computer to be in the same subnet as that of the default NBG6616
IP address (192.168.1.1). See
Appendix B on page 198
for details on how to set up
your computer’s IP address.
25.8
Restart Screen
System restart allows you to reboot the NBG6616 without turning the power off.
Click
Maintenance > Restart
to open the following screen.
Figure 123
Maintenance > Restart
Click
Restart
to have the NBG6616 reboot. This does not affect the NBG6616's configuration.
25.9
Language Screen
Use this screen to change the language for the Web Configurator.
Select the language you prefer and click
Apply
. The Web Configurator language changes after a
while without restarting the NBG6616.
Upload
Click
Upload
to begin the upload process.
Note: Do not turn off the NBG6616 while configuration file upload is in progress.
After you see a “configuration upload successful” screen, you must then wait one minute
before logging into the NBG6616 again. The NBG6616 automatically restarts in this time
causing a temporary network disconnect.
If you see an error screen, click Back to return to the Backup/Restore screen.
Reset
Pressing the
Reset
button in this section clears all user-entered configuration information
and returns the NBG6616 to its factory defaults.
You can also press the
RESET
button on the rear panel to reset the factory defaults of your
NBG6616. Refer to the chapter about introducing the Web Configurator for more
information on the
RESET
button.
Table 79
Maintenance > Backup/Restore (continued)
LABEL
DESCRIPTION