ZyXEL NBG6616 User Guide - Page 56

Tutorials, 8.1 Overview, 8.2 Set Up a Wireless Network Using WPS

Page 56 highlights

CHAPTER 8 Tutorials 8.1 Overview This chapter provides tutorials for setting up your NBG6616. • Set Up a Wireless Network Using WPS • Connect to NBG6616 Wireless Network without WPS • Using Multiple SSIDs on the NBG6616 8.2 Set Up a Wireless Network Using WPS This section gives you an example of how to set up wireless network using WPS. This example uses the NBG6616 as the AP and NWD210N as the wireless client which connects to a notebook. Note: The wireless client must be a WPS-aware device (for example, a WPS USB adapter or PCI card). There are two WPS methods for creating a secure connection via the web configurator or utility. This tutorial shows you how to do both. • Push Button Configuration (PBC) - create a secure wireless network simply by pressing a button. See Section 8.2.1 on page 56. This is the easier method. • PIN Configuration - create a secure wireless network simply by entering a wireless client's PIN (Personal Identification Number) in the NBG6616's interface. See Section 8.2.2 on page 57. This is the more secure method, since one device can authenticate the other. 8.2.1 Push Button Configuration (PBC) 1 Make sure that your NBG6616 is turned on. Make sure the WIFI button (at the back panel of the NBG6616) is pushed in, and that the device is placed within range of your notebook. 2 Make sure that you have installed the wireless client (this example uses the NWD210N) driver and utility in your notebook. 3 In the wireless client utility, find the WPS settings. Enable WPS and press the WPS button (Start or WPS button) 4 Log into NBG6616's Web Configurator and press the Push Button in the Configuration > Network > Wireless LAN 2.4G > WPS Station screen. NBG6616 User's Guide 56

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241

NBG6616 User’s Guide
56
C
HAPTER
8
Tutorials
8.1
Overview
This chapter provides tutorials for setting up your NBG6616.
Set Up a Wireless Network Using WPS
Connect to NBG6616 Wireless Network without WPS
Using Multiple SSIDs on the NBG6616
8.2
Set Up a Wireless Network Using WPS
This section gives you an example of how to set up wireless network using WPS. This example uses
the NBG6616 as the AP and NWD210N as the wireless client which connects to a notebook.
Note: The wireless client must be a WPS-aware device (for example, a WPS USB adapter
or PCI card).
There are two WPS methods for creating a secure connection via the web configurator or utility.
This tutorial shows you how to do both.
Push Button Configuration (PBC)
- create a secure wireless network simply by pressing a
button. See
Section 8.2.1 on page 56
. This is the easier method.
PIN Configuration
- create a secure wireless network simply by entering a wireless client's PIN
(Personal Identification Number) in the NBG6616’s interface. See
Section 8.2.2 on page 57
. This
is the more secure method, since one device can authenticate the other.
8.2.1
Push Button Configuration (PBC)
1
Make sure that your NBG6616 is turned on. Make sure the
WIFI
button (at the back panel of the
NBG6616) is pushed in, and that the device is placed within range of your notebook.
2
Make sure that you have installed the wireless client (this example uses the NWD210N) driver and
utility in your notebook.
3
In the wireless client utility, find the WPS settings. Enable WPS and press the WPS button (
Start
or
WPS
button)
4
Log into NBG6616’s Web Configurator and press the
Push Button
in the
Configuration >
Network > Wireless LAN 2.4G > WPS Station
screen.