ZyXEL NBG6616 User Guide - Page 28
Table 10, LABEL, DESCRIPTION, Connection Wizard, NBG6616 User's Guide
View all ZyXEL NBG6616 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Chapter 3 Connection Wizard Figure 14 Wireless Security: WPA2-PSK The following table describes the labels in this screen. Table 10 Wireless Security: WPA2-PSK LABEL DESCRIPTION Wireless Network Name (SSID) Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless LAN. Note: The setting here applies to both 2.4 GHz and 5 GHz wireless radios. Security Mode If you change this field on the NBG6616, make sure all wireless stations use the same SSID in order to access the network. Select a security level from the drop-down list box. Note: The setting here applies to both 2.4 GHz and 5 GHz wireless radios. Wireless password Verify Password Exit Back Next Choose WPA2-PSK security to configure a Pre-Shared Key. Choose this option only if your wireless clients support WPA2-PSK. Type from 8 to 63 case-sensitive ASCII characters. You can set up the most secure wireless connection by configuring WPA in the wireless LAN screens. Retype the password to confirm. Click this to close the wizard screen without saving. Click this to return to the previous screen. Click this to continue. Congratulations! Open a web browser, such as Internet Explorer, to visit your favorite website. Note: If you cannot access the Internet when your computer is connected to one of the NBG6616's LAN ports, check your connections. Then turn the NBG6616 off, wait for a few seconds then turn it back on. If that does not work, log in to the web configurator again and check you have typed all information correctly. See the User's Guide for more suggestions. NBG6616 User's Guide 28