Home » ZyXEL Manuals » Bridges & Routers » ZyXEL NBG6616 » Manual Viewer

ZyXEL NBG6616 User Guide - Page 78

Table 26, Label, Description

Add to My Manuals
Save this manual to your list of manuals

Page 78 highlights

Chapter 10 WAN Table 26 Network > WAN > Internet Connection: IPoE Encapsulation (continued) LABEL Obtain an IP Address Automatically Static IP Address IP Address Subnet Mask Gateway IP Address MTU Size 6RD DESCRIPTION Select this option If your ISP did not assign you a fixed IP address. This is the default selection. Select this option If the ISP assigned a fixed IP address. Enter your WAN IP address in this field if you selected Static IP Address. Enter the Subnet Mask in this field. Enter a Gateway IP Address (if your ISP gave you one) in this field. Enter the MTU (Maximum Transmission Unit) size for each packet. If a larger packet arrives, the NBG6616 divides it into smaller fragments. Use IPv6 Rapid Deployment (6rd) when the local network uses IPv6 and the ISP has an IPv4 network. When the NBG6616 has an IPv4 WAN address and you set IPv6/IPv4 mode to IPv4 Only, you can enable 6rd to encapsulate IPv6 packets in IPv4 packets to cross the ISP's IPv4 network. The NBG6616 generates a global IPv6 prefix from its IPv4 WAN address and tunnels IPv6 traffic to the ISP's Border Relay router to connect to the native IPv6 Internet. The local network can also use IPv4 services. The NBG6616 uses its configured IPv4 WAN IP to route IPv4 traffic to the IPv4 Internet. This is available only when you select IPv4 Only in the IPv6/IPv4 field. Enable 6RD Enable IPv6 rapid deployment to tunnel IPv6 traffic from the local network through the ISP's IPv4 network. Automatically configured by DHCPC Select this to have the NBG6616 detect the relay server's IP address automatically through DHCP. Manually Configured Select this if you have the IPv4 address of the relay server. Border Relay IPv4 Address Specify the relay server's IPv4 address. Service Provider IPv6 Prefix Enter an IPv6 prefix for tunneling IPv6 traffic to the ISP's Border Relay router and connecting to the native IPv6 Internet. Service Provider IPv6 Prefix length Enter the IPv6 prefix length. An IPv6 prefix length specifies how many most significant bits (starting from the left) in the address compose the network address. IPv4 mask length Enter the subnet mask number (1~32) for the IPv4 network. DNS Server First DNS Server Second DNS Server Select Obtained From ISP if your ISP dynamically assigns DNS server information (and the NBG6616's WAN IP address). The field to the right displays the (read-only) DNS server IP address that the ISP assigns. Third DNS Server Select User-Defined if you have the IP address of a DNS server. Enter the DNS server's IP address in the field to the right. WAN MAC Address Factory default Clone the computer's MAC address - IP Address Select None if you do not want to configure DNS servers. If you do not configure a DNS server, you must know the IP address of a computer in order to access it. The MAC address section allows users to configure the WAN port's MAC address by either using the NBG6616's MAC address, copying the MAC address from a computer on your LAN or manually entering a MAC address. Select Factory default to use the factory assigned default MAC Address. Select Clone the computer's MAC address - IP Address and enter the IP address of the computer on the LAN whose MAC you are cloning. NBG6616 User's Guide 78

Section	Page
NBG6616	1
Contents Overview	3
Table of Contents	4
User’s Guide	11
Introduction	12
1.1 Overview	12
1.2 Applications	12
1.3 Ways to Manage the NBG6616	12
1.4 Good Habits for Managing the NBG6616	13
1.5 Resetting the NBG6616	13
1.5.1 How to Use the RESET Button	13
1.6 The WPS Button	13
1.7 LEDs	14
1.8 Wall Mounting	15
Introducing the Web Configurator	17
2.1 Overview	17
2.2 Accessing the Web Configurator	17
2.2.1 Login Screen	17
2.2.2 Password Screen	18
Connection Wizard	20
3.1 Overview	20
3.2 Accessing the Wizard	20
3.3 Connect to Internet	21
3.3.1 Connection Type: IPoE	22
3.3.2 Connection Type: PPPoE	24
3.4 Router Password	25
3.5 Wireless Security	26
3.5.1 Wireless Security: No Security	26
3.5.2 Wireless Security: WPA2-PSK	27
NBG6616 Modes	30
4.1 Overview	30
4.1.1 Web Configurator Modes	30
4.1.2 Device Modes	30
Easy Mode	31
5.1 Overview	31
5.2 What You Can Do	32
5.3 What You Need to Know	32
5.4 Navigation Panel	32
5.5 Network Map	33
5.6 Control Panel	34
5.6.1 Game Engine	35
5.6.2 Power Saving	35
5.6.3 Parental Control	36
5.6.4 Bandwidth MGMT	37
5.6.5 Firewall	38
5.6.6 Wireless Security	38
5.6.7 WPS	39
5.7 Status Screen in Easy Mode	40
Router Mode	42
6.1 Overview	42
6.2 Router Mode Status Screen	42
6.2.1 Navigation Panel	45
Access Point Mode	49
7.1 Overview	49
7.2 What You Can Do	49
7.3 What You Need to Know	49
7.3.1 Setting your NBG6616 to AP Mode	50
7.3.2 Accessing the Web Configurator in Access Point Mode	50
7.3.3 Configuring your WLAN and Maintenance Settings	51
7.4 AP Mode Status Screen	51
7.4.1 Navigation Panel	53
7.5 LAN Screen	53
Tutorials	56
8.1 Overview	56
8.2 Set Up a Wireless Network Using WPS	56
8.2.1 Push Button Configuration (PBC)	56
8.2.2 PIN Configuration	57
8.3 Connect to NBG6616 Wireless Network without WPS	58
8.3.1 Configure Your Notebook	60
8.4 Using Multiple SSIDs on the NBG6616	62
8.4.1 Configuring Security Settings of Multiple SSIDs	63
Technical Reference	68
Monitor	69
9.1 Overview	69
9.2 What You Can Do	69
9.3 The Log Screen	69
9.3.1 View Log	69
9.4 DHCP Table	70
9.5 Packet Statistics	71
9.6 WLAN Station Status	72
WAN	74
10.1 Overview	74
10.2 What You Can Do	74
10.3 What You Need To Know	74
10.3.1 Configuring Your Internet Connection	75
10.4 Internet Connection	76
10.4.1 IPoE Encapsulation	76
10.4.2 PPPoE Encapsulation	79
10.5 Advanced WAN Screen	82
Wireless LAN	84
11.1 Overview	84
11.1.1 What You Can Do	85
11.1.2 What You Should Know	85
11.2 General Wireless LAN Screen	89
11.3 Wireless Security	91
11.3.1 No Security	91
11.3.2 WEP Encryption	92
11.3.3 WPA-PSK/WPA2-PSK	94
11.3.4 WPA/WPA2	95
11.4 More AP Screen	97
11.4.1 More AP Edit	98
11.5 MAC Filter Screen	100
11.6 Wireless LAN Advanced Screen	102
11.7 Quality of Service (QoS) Screen	102
11.8 WPS Screen	103
11.9 WPS Station Screen	105
11.10 Scheduling Screen	105
LAN	107
12.1 Overview	107
12.2 What You Can Do	107
12.3 What You Need To Know	107
12.3.1 IP Alias	108
12.4 LAN IP Screen	108
12.5 IP Alias Screen	109
12.6 IPv6 LAN Screen	110
DHCP Server	111
13.1 Overview	111
13.1.1 What You Can Do	111
13.1.2 What You Need To Know	111
13.2 DHCP Server General Screen	111
13.3 DHCP Server Advanced Screen	112
13.4 DHCP Client List Screen	114
NAT	116
14.1 Overview	116
14.1.1 What You Can Do	116
14.2 General	117
14.3 Port Forwarding Screen	117
14.3.1 Port Forwarding Edit Screen	119
14.4 Port Trigger Screen	120
14.5 Technical Reference	121
14.5.1 NATPort Forwarding: Services and Port Numbers	121
14.5.2 NAT Port Forwarding Example	121
14.5.3 Trigger Port Forwarding	122
14.5.4 Trigger Port Forwarding Example	122
14.5.5 Two Points To Remember About Trigger Ports	123
DDNS	124
15.1 Overview	124
15.1.1 What You Need To Know	124
15.2 General	124
Static Route	126
16.1 Overview	126
16.2 IP Static Route Screen	126
16.2.1 Add/Edit Static Route	127
Firewall	129
17.1 Overview	129
17.1.1 What You Can Do	129
17.1.2 What You Need To Know	129
17.2 General Screen	130
17.3 Services Screen	131
Content Filtering	134
18.1 Overview	134
18.2 Content Filter	134
Parental Control	136
19.1 Overview	136
19.1.1 What You Need To Know	136
19.2 Parental Control Screen	136
19.2.1 Add/Edit a Parental Control Rule	137
19.2.2 Add/Edit a Service	139
19.3 Technical Reference	140
19.3.1 Customizing Keyword Blocking URL Checking	140
IPv6 Firewall	142
20.1 Overview	142
20.2 IPv6 Firewall Screen	142
Bandwidth Management	145
21.1 Overview	145
21.2 What You Can Do	145
21.3 What You Need To Know	146
21.4 General Screen	146
21.5 Advanced Screen	146
21.5.1 Rule Configuration: Application Rule Configuration	148
21.5.2 Rule Configuration: User Defined Service Rule Configuration	149
21.5.3 Predefined Bandwidth Management Services	151
Remote Management	152
22.1 Overview	152
22.2 What You Can Do in this Chapter	152
22.3 What You Need to Know	152
22.3.1 Remote Management and NAT	153
22.3.2 System Timeout	153
22.4 WWW Screen	153
22.5 Telnet Screen	154
22.6 Wake On LAN Screen	154
Universal Plug-and-Play (UPnP)	156
23.1 Overview	156
23.2 What You Need to Know	156
23.2.1 NAT Traversal	156
23.2.2 Cautions with UPnP	156
23.3 UPnP Screen	157
23.4 Technical Reference	157
23.4.1 Using UPnP in Windows XP Example	157
23.4.2 Web Configurator Easy Access	159
USB Media Sharing	162
24.1 Overview	162
24.2 What You Can Do	163
24.3 What You Need To Know	163
24.4 Before You Begin	164
24.5 DLNA Screen	165
24.6 SAMBA Screen	165
24.7 FTP Screen	167
24.8 Example of Accessing Your Shared Files From a Computer	168
24.8.1 Use Windows Explorer to Share Files	168
24.8.2 Use FTP to Share Files	170
Maintenance	172
25.1 Overview	172
25.2 What You Can Do	172
25.3 General Screen	172
25.4 Password Screen	173
25.5 Time Setting Screen	174
25.6 Firmware Upgrade Screen	175
25.7 Configuration Backup/Restore Screen	177
25.8 Restart Screen	178
25.9 Language Screen	178
25.10 System Operation Mode Overview	179
25.11 Sys OP Mode Screen	180
Troubleshooting	182
26.1 Overview	182
26.2 Power, Hardware Connections, and LEDs	182
26.3 NBG6616 Access and Login	183
26.4 Internet Access	184
26.5 Resetting the NBG6616 to Its Factory Defaults	186
26.6 Wireless Connections	186
26.7 USB Device Problems	188
Pop-up Windows, JavaScript and Java Permissions	189
Setting Up Your Computer’s IP Address	198
Common Services	224
Legal Information	227
Customer Support	232

Match case Limit results 1 per page

Chapter 10 WAN

NBG6616 User’s Guide

Obtain an IP

Address

Automatically

Select this option If your ISP did not assign you a fixed IP address. This is the default

selection.

Static IP Address

Select this option If the ISP assigned a fixed IP address.

IP Address

Enter your WAN IP address in this field if you selected

Static IP Address

Subnet Mask

Enter the

Subnet Mask

in this field.

Gateway IP

Address

Enter a

Gateway IP Address

(if your ISP gave you one) in this field.

MTU Size

Enter the MTU (Maximum Transmission Unit) size for each packet. If a larger packet

arrives, the NBG6616 divides it into smaller fragments.

6RD

Use IPv6 Rapid Deployment (6rd) when the local network uses IPv6 and the ISP has an IPv4 network. When

the NBG6616 has an IPv4 WAN address and you set IPv6/IPv4 mode to

IPv4 Only

, you can enable 6rd to

encapsulate IPv6 packets in IPv4 packets to cross the ISP’s IPv4 network.

The NBG6616 generates a global IPv6 prefix from its IPv4 WAN address and tunnels IPv6 traffic to the ISP’s

Border Relay router to connect to the native IPv6 Internet. The local network can also use IPv4 services. The

NBG6616 uses its configured IPv4 WAN IP to route IPv4 traffic to the IPv4 Internet.

This is available only when you select

IPv4 Only

in the

IPv6/IPv4

field.

Enable 6RD

Enable IPv6 rapid deployment to tunnel IPv6 traffic from the local network through the

ISP’s IPv4 network.

Automatically

configured by

DHCPC

Select this to have the NBG6616 detect the relay server’s IP address automatically

through DHCP.

Manually Configured

Select this if you have the IPv4 address of the relay server.

Border Relay IPv4

Address

Specify the relay server’s IPv4 address.

Service Provider

IPv6 Prefix

Enter an IPv6 prefix for tunneling IPv6 traffic to the ISP’s Border Relay router and

connecting to the native IPv6 Internet.

Service Provider

IPv6 Prefix length

Enter the IPv6 prefix length.

An IPv6 prefix length specifies how many most significant bits (starting from the left) in

the address compose the network address.

IPv4 mask length

Enter the subnet mask number (1~32) for the IPv4 network.

DNS Server

First DNS Server

Second DNS Server

Third DNS Server

Select

Obtained From ISP

if your ISP dynamically assigns DNS server information

(and the NBG6616's WAN IP address). The field to the right displays the (read-only)

DNS server IP address that the ISP assigns.

Select

User-Defined

if you have the IP address of a DNS server. Enter the DNS

server's IP address in the field to the right.

Select

None

if you do not want to configure DNS servers. If you do not configure a DNS

server, you must know the IP address of a computer in order to access it.

WAN MAC Address

The MAC address section allows users to configure the WAN port's MAC address by

either using the NBG6616’s MAC address, copying the MAC address from a computer on

your LAN or manually entering a MAC address.

Factory default

Select

Factory default

to use the factory assigned default MAC Address.

Clone the

computer’s MAC

address - IP

Address

Select

Clone the computer's MAC address - IP Address

and enter the IP address of

the computer on the LAN whose MAC you are cloning.

Table 26

Network > WAN > Internet Connection: IPoE Encapsulation (continued)

LABEL

DESCRIPTION