ZyXEL NBG6616 User Guide - Page 91

Wireless Security, 11.3.1 No Security, No Security, WPA2-PSK, Table 30, LABEL

Page 91 highlights

Chapter 11 Wireless LAN Table 30 Network > Wireless LAN 2.4G/5G > General (continued) LABEL DESCRIPTION Security Mode Select Static WEP, WPA-PSK, WPA, WPA2-PSK or WPA2 to add security on this wireless network. The wireless clients which want to associate to this network must have same wireless security settings as this device. After you select to use a security, additional options appears in this screen. See Section 11.3 on page 91 for detailed information on different security modes. Or you can select No Security to allow any client to associate this network without authentication. Apply Cancel Note: If the WPS function is enabled (default), only No Security and WPA2-PSK are available in this field. Click Apply to save your changes back to the NBG6616. Click Cancel to reload the previous configuration for this screen. See the rest of this chapter for information on the other labels in this screen. 11.3 Wireless Security The screen varies depending on what you select in the Security Mode field. 11.3.1 No Security Select No Security to allow wireless clients to communicate with the access points without any data encryption. Note: If you do not enable any wireless security on your NBG6616, your network is accessible to any wireless networking device that is within range. Figure 54 Network > Wireless LAN 2.4G/5G > General: No Security NBG6616 User's Guide 91

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241

Chapter 11 Wireless LAN
NBG6616 User’s Guide
91
See the rest of this chapter for information on the other labels in this screen.
11.3
Wireless Security
The screen varies depending on what you select in the
Security Mode
field.
11.3.1
No Security
Select
No Security
to allow wireless clients to communicate with the access points without any
data encryption.
Note: If you do not enable any wireless security on your NBG6616, your network is
accessible to any wireless networking device that is within range.
Figure 54
Network > Wireless LAN 2.4G/5G > General: No Security
Security Mode
Select
Static WEP
,
WPA-PSK
,
WPA
,
WPA2-PSK
or
WPA2
to add security on this
wireless network. The wireless clients which want to associate to this network must have
same wireless security settings as this device. After you select to use a security,
additional options appears in this screen. See
Section 11.3 on page 91
for detailed
information on different security modes. Or you can select
No Security
to allow any
client to associate this network without authentication.
Note: If the WPS function is enabled (default), only
No Security
and
WPA2-PSK
are
available in this field.
Apply
Click
Apply
to save your changes back to the NBG6616.
Cancel
Click
Cancel
to reload the previous configuration for this screen.
Table 30
Network > Wireless LAN 2.4G/5G > General (continued)
LABEL
DESCRIPTION