ZyXEL NBG6616 User Guide - Page 39

WPS, Wireless, Security

Page 39 highlights

Chapter 5 Easy Mode Note: You can enable the wireless function of your NBG6616 by first turning on the switch in the back panel. Figure 26 Wireless Security The following table describes the general wireless LAN labels in this screen. Table 15 Wireless Security LABEL Wireless Radio Wireless Network Name (SSID) Security mode DESCRIPTION Choose whether you want to apply the wireless security to 2.4G Hz or 5G Hz wireless radio. (Service Set IDentity) The SSID identifies the Service Set with which a wireless station is associated. Wireless stations associating to the access point (AP) must have the same SSID. Enter a descriptive name (up to 32 keyboard characters) for the wireless LAN. Select WPA2-PSK to add security on this wireless network. The wireless clients which want to associate to this network must have same wireless security settings as this device. After you select to use a security, additional options appears in this screen. Wireless password Verify password Apply Cancel WPS Select No Security to allow any client to connect to this network without authentication. This field appears when you choose wither WPA2-PSK as the security mode. Type a pre-shared key from 8 to 63 case-sensitive keyboard characters. Type the password again to confirm. Click Apply to save your changes back to the NBG6616. Click Cancel to close this screen. Click this to configure the WPS screen. You can transfer the wireless settings configured here (Wireless Security screen) to another wireless device that supports WPS. 5.6.7 WPS Use this screen to add a wireless station to the network using WPS. Click WPS in the Wireless Security to open the following screen. NBG6616 User's Guide 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241

Chapter 5 Easy Mode
NBG6616 User’s Guide
39
Note: You can enable the wireless function of your NBG6616 by first turning on the switch
in the back panel.
Figure 26
Wireless Security
The following table describes the general wireless LAN labels in this screen.
5.6.7
WPS
Use this screen to add a wireless station to the network using WPS. Click
WPS
in the
Wireless
Security
to open the following screen.
Table 15
Wireless Security
LABEL
DESCRIPTION
Wireless Radio
Choose whether you want to apply the wireless security to
2.4G Hz
or
5G Hz
wireless
radio.
Wireless
Network Name
(SSID)
(Service Set IDentity) The SSID identifies the Service Set with which a wireless station is
associated. Wireless stations associating to the access point (AP) must have the same
SSID. Enter a descriptive name (up to 32 keyboard characters) for the wireless LAN.
Security mode
Select
WPA2-PSK
to add security on this wireless network. The wireless clients which
want to associate to this network must have same wireless security settings as this device.
After you select to use a security, additional options appears in this screen.
Select
No Security
to allow any client to connect to this network without authentication.
Wireless
password
This field appears when you choose wither
WPA2-PSK
as the security mode.
Type a pre-shared key from 8 to 63 case-sensitive keyboard characters.
Verify password
Type the password again to confirm.
Apply
Click
Apply
to save your changes back to the NBG6616.
Cancel
Click
Cancel
to close this screen.
WPS
Click this to configure the WPS screen.
You can transfer the wireless settings configured here (
Wireless Security
screen) to
another wireless device that supports WPS.