ZyXEL NBG6616 User Guide - Page 99
Wireless LAN, NBG6616 User's Guide
View all ZyXEL NBG6616 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Chapter 11 Wireless LAN Figure 60 Network > Wireless LAN 2.4G/5G > More AP: Edit (the last SSID) The following table describes the labels in this screen. Table 36 Network > Wireless LAN 2.4G/5G > More AP: Edit LABEL DESCRIPTION Active Select this to activate the SSID profile. Name (SSID) The SSID (Service Set IDentity) identifies the Service Set with which a wireless client is associated. Enter a descriptive name (up to 32 printable characters found on a typical English language keyboard) for the wireless LAN. Hide SSID Select this check box to hide the SSID in the outgoing beacon frame so a station cannot obtain the SSID through scanning using a site survey tool. Intra-BSS Traffic A Basic Service Set (BSS) exists when all communications between wireless clients or between a wireless client and a wired network client go through one access point (AP). WMM QoS Intra-BSS traffic is traffic between wireless clients in the BSS. When Intra-BSS is enabled, wireless clients can access the wired network and communicate with each other. When Intra-BSS is disabled, wireless clients can still access the wired network but cannot communicate with each other. Check this to have the NBG6616 automatically give a service a priority level according to the ToS value in the IP header of packets it sends. Enable Guest WLAN WMM QoS (Wifi MultiMedia Quality of Service) gives high priority to voice and video, which makes them run more smoothly. Select the check box to activate guest wireless LAN. This is available only for the last SSID on the NBG6616. IP Address IP Subnet Mask Note: Only Router mode supports guest WLAN. AP mode doesn't support guest WLAN. Type an IP address for the devices on the Guest WLAN using this as the gateway IP address. Type the subnet mask for the guest wireless LAN. NBG6616 User's Guide 99