ZyXEL PLA450 v2 User Guide - Page 32
ENCRYPT Button Behavior, ENCRYPT
View all ZyXEL PLA450 v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Chapter 3 The ENCRYPT Button 1 Click the ENCRYPT button on (A) for more than 10 seconds until the HomePlug ( ) light is off. This disconnects (A) from (B). 2 Click the ENCRYPT button on (A) and (C) for 1~2 seconds and within two minutes of each other. 3 Wait for about one minute while (A) and (C) connect. 4 Check the lights on both (A) and (C). When the HomePlug ( ) lights shine steadily, the devices are connected. Figure 7 Two Separate Powerline Networks B A C Congratulations. You now have two separate powerline networks as shown above. V If the HomePlug ( ) lights on both powerline devices do not light up, the powerline devices are not connected. Repeat the connection process, making certain you press the ENCRYPT buttons for the correct time and within two minutes of each other. If that does not work see Section 14.7 on page 120 for suggestions. 3.4 ENCRYPT Button Behavior The following table summarizes the actions that occur when the ENCRYPT button is pressed for specific lengths of time. Table 2 Time ENCRYPT Button is Pressed and Action TIME ACTION HOMEPLUG LIGHT BEHAVIOR less than 3 seconds The device joins a network. It The HomePlug ( ) light turns shares the same network name on if your device is connected to as other devices on the network. another powerline device or a powerline network. more than 10 seconds The device leaves any network it is associated with and its network name assumes a random value. The HomePlug ( ) light turns off when it disconnects from the powerline network. 32 PLA450 User's Guide