ZyXEL PLA450 v2 User Guide - Page 49
Configuring the Wireless Client, 5.3.1 Connecting to a Wireless LAN
View all ZyXEL PLA450 v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Figure 15 Status: Wireless Settings Example Chapter 5 Wireless Tutorial 6 Click the WLAN Station Status hyperlink in the AP's Status screen. You can see if any wireless client has connected to the AP. Figure 16 AP: Status: WLAN Station Status 5.3 Configuring the Wireless Client This section describes how to connect the wireless client to a network. 5.3.1 Connecting to a Wireless LAN The following sections show you how to join a wireless network using the ZyXEL utility, as in the following diagram. The wireless client is labelled C and the access point (PLA450) is labelled AP. D is the broadband modem. PLA450 User's Guide 49
Chapter 5 Wireless Tutorial
PLA450 User’s Guide
49
Figure 15
Status: Wireless Settings Example
6
Click the
WLAN Station Status
hyperlink in the AP’s
Status
screen. You can see if any
wireless client has connected to the AP.
Figure 16
AP: Status: WLAN Station Status
5.3
Configuring the Wireless Client
This section describes how to connect the wireless client to a network.
5.3.1
Connecting to a Wireless LAN
The following sections show you how to join a wireless network using the ZyXEL utility, as in
the following diagram. The wireless client is labelled
C
and the access point (PLA450) is
labelled
AP
.
D
is the broadband modem.