ZyXEL PLA450 v2 User Guide - Page 48
Enable Wireless LAN, SSID_Example3, WPA-PSK, ThisismyWPA-PSKpre-sharedkey, Pre-Shared Key, Apply
View all ZyXEL PLA450 v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Chapter 5 Wireless Tutorial Figure 14 Network > Wireless LAN > General 2 Make sure the Enable Wireless LAN check box is selected. 3 Enter SSID_Example3 as the SSID and select a channel. 4 Set security mode to WPA-PSK and enter ThisismyWPA-PSKpre-sharedkey in the Pre-Shared Key field. Click Apply. 5 Open the Status screen.Verify your wireless and wireless security settings under Device Information and check if the WLAN connection is up under Interface Status. 48 PLA450 User's Guide
Chapter 5 Wireless Tutorial
PLA450 User’s Guide
48
Figure 14
Network > Wireless LAN > General
2
Make sure the
Enable Wireless LAN
check box is selected.
3
Enter
SSID_Example3
as the SSID and select a channel.
4
Set security mode to
WPA-PSK
and enter
ThisismyWPA-PSKpre-sharedkey
in the
Pre-Shared Key
field. Click
Apply
.
5
Open the
Status
screen.Verify your wireless and wireless security settings under
Device
Information
and check if the WLAN connection is up under
Interface Status
.