2010 Ford Expedition EL Owner Guide 1st Printing (Spanish) - Page 548

Entertainment Systems 3. Connect an auxiliary audio/video source by connecting RCA cords (not included) to the RCA jacks on the left hand side of the system. • Yellow (1) - video input • White (2) - left channel audio input • Red (3) - right channel audio input 4. Press MEDIA on the DVD system to change the media source to AUX. 5. Press VIDEO on the DVD system to change the video source to DVD-AUX. If your source is properly plugged in, it will appear on the LCD (Liquid Crystal Display) screen. If your auxiliary source does not have a video signal, or if the DVD system does not detect a video signal from the auxiliary source, the screen will remain black. If the video source is set to DVD-AUX, the display will automatically turn on if a video signal is detected. To listen to audio over the headphones- Dual play mode (Navigation-based radio systems only): You may listen to channels A and B over wired or wireless headphones. Refer to Using the infrared wireless headphones and Using wired headphones for further information. • Black (4) - wired headphone output (wired headphones not included) There are two ways to get into dual play mode: 1. After initially switching ignition on, when a is disc inserted, the FES immediately switches to dual-play mode. / button on the DVD player or 2. Press the headphone/speaker navigation radio touch screen. 3. Press the 2 and 4 memory presets on the radio at the same time. Repeating each of these actions will switch back to single play mode, all speakers playing and headphones off. A green light will illuminate next to either the A or B Headphone Control Button to indicate which channel is active (able to be controlled). 74 2010 Expedition (exd) Owners Guide (own2002), 1st Printing USA (fus)