2010 Ford Expedition EL Owner Guide 1st Printing (Spanish) - Page 628

Driver Controls To erase programming on the Car2U௡ system (individual buttons cannot be erased), use the following procedure: 1. Firmly press the two outside Car2U௡ system buttons simultaneously for approximately 20 seconds until the indicator lights begin to blink rapidly. The indicator lights are located directly above the buttons. 2. Once the indicator lights begin to blink, release your fingers from the buttons. The codes for all buttons are erased. If you sell your vehicle equipped with the Car2U௡ system, it is recommended that you erase the programming for security reasons. FCC and RSS-210 Industry Canada Compliance The Car2U௡ system complies with Part 15 of the FCC rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received including interference that may cause undesired operation. Changes and modifications to the Car2U௡ system transmitter by other than an authorized service facility could void authorization to use the equipment. POWER LIFTGATE (IF EQUIPPED) The liftgate can be operated by the following: • Instrument panel control button • Key fob button • Outside control button • Control button in the rear cargo area Note: The liftgate can be reversed with a second press on a control button or key fob and can be manually closed at any time. Opening and closing the power liftgate: WARNING: Make sure all persons are clear of the power liftgate area before using the power liftgate control. 154 2010 Expedition (exd) Owners Guide (own2002), 1st Printing USA (fus)