Brother International IntelliFax-2820 Users Manual - English - Page 76

Making copies, Using the machine as a copier, Enter Copy mode, Making a single copy, copier

Page 76 highlights

' 8 Making copies Using the machine as a copier You can use your machine as a copier, making up to 99 copies at a time. Enter Copy mode Before making copies, make sure that (Copy) is illuminated in green. If it is not, press (Copy) to enter Copy mode. The default setting is Fax mode. You can change the number of seconds or minutes that the machine stays in Copy mode. (See Setting the Mode Timer (FAX-2820, FAX-2910 and FAX-2920 only) on page 2-3 or Setting the Mode Timer (MFC-7220 and MFC-7225N only) on page 2-3.) The printable area of your machine begins at approximately 0.16 in. (4 mm) from both sides and 0.12 in. (3 mm) from the top or bottom of the paper. 0.16" (4 mm) 0.12" (3 mm) Unprintable area Note This printable area shown above is for a single copy or a 1 in 1 copy using Letter or Legal size paper. The printable area changes 8 with the paper size. Making a single copy 1 Press green. (Copy) to illuminate it in 2 Load your document. (See Load document on page 1-7.) 3 Press Start. The LCD shows the default copy setting Copy Ratio Quality No. of Copies 8 - 1

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159

8 - 1
8
8
Using the machine as a
copier
You can use your machine as a copier,
making up to 99 copies at a time.
Enter Copy mode
Before making copies, make sure that
(
Copy
) is illuminated in green. If it is
not, press
(
Copy
) to enter
Copy
mode.
The default setting is Fax mode. You can
change the number of seconds or minutes
that the machine stays in
Copy
mode. (See
Setting the Mode Timer (FAX-2820,
FAX-2910 and FAX-2920 only)
on page 2-3
or
Setting the Mode Timer (MFC-7220 and
MFC-7225N only)
on page 2-3.)
The printable area of your machine begins at
approximately 0.16 in. (4 mm) from both
sides and 0.12 in. (3 mm) from the top or
bottom of the paper.
Note
This printable area shown above is for a
single copy or a 1 in 1 copy using Letter or
Legal size paper. The printable area changes
with the paper size.
Making a single copy
1
Press
(
Copy
) to illuminate it in
green.
2
Load your document.
(See
Load document
on page 1-7.)
3
Press
Start
.
Making copies
Copy Ratio
The LCD shows the default copy setting
Quality
No. of Copies
0.16" (4 mm)
0.12" (3 mm)
Unprintable
area