Brother International SE2000 Operation Manual - Page 106
Touch panel is malfunctioning
View all Brother International SE2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Care and Maintenance Grasp the bobbin case, and then pull it out. h Insert the tabs on the needle plate cover into the k needle plate, and then slide the cover back on. Reattach the bobbin cover. Use the cleaning brush or a vacuum cleaner to remove i any lint and dust from the race and bobbin thread sensor and the surrounding area. c a b 1 Cleaning brush 2 Race 3 Bobbin thread sensor CAUTION • Never use a bobbin case that is scratched or has a burr on it. Otherwise the upper thread may become tangled, the needle may break and cause injury. For a new bobbin case, contact your nearest Brother authorized service center. • Be sure that the bobbin case is correctly installed, otherwise the needle may break and cause injury. IMPORTANT • Do not apply oil to the bobbin case. Insert the bobbin case so that the mark on the j bobbin case aligns with the mark on the machine. ab a Touch panel is malfunctioning If the screen does not respond correctly when you touch a key (the machine does not perform the operation or performs a different operation), follow the steps below to make the proper adjustments. Holding your finger on the screen, turn the main a power switch to OFF and back to ON. b • Align the and marks. c 1 mark 2 mark 3 Bobbin case • Make sure that the indicated points are aligned before installing the bobbin case. The touch panel adjustment screen is displayed. Lightly touch the center of each +, in order from 1 to 5. b +1 +4 +5 +2 +3 Turn the main power to OFF, then turn it back to ON. c 104