Brother International SE2000 Operation Manual - Page 62
Zipper/piping insertion
View all Brother International SE2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Utility Stitches Note • When using zipper foot "I", be sure to select the straight stitch (middle (center) needle position), and slowly turn the handwheel toward you (counterclockwise) to check that the needle does not touch the presser foot. Topstitch around the zipper. i 1 3 2 4 1 Stitching 2 Right side of fabric 3 Basting stitching 4 End of zipper opening Zipper/piping insertion A zipper and piping can be sewn in place. Use adjustable zipper/piping foot (sold separately with some models). ■ Inserting a centered zipper Refer to step a-f of "Inserting a centered zipper" a on page 59. Remove the presser foot and presser foot holder to b attach the screw-on adjustable zipper/piping foot (sold separately with some models). • For details on removing the presser foot holder, refer to "Removing and attaching the presser foot holder" on page 31. CAUTION • When sewing, be sure that the needle does not touch the zipper, otherwise the needle may break and cause injury. Memo • If the presser foot contacts the zipper slider, leave the needle lowered (in the fabric) and raise the presser foot. After moving the slider so it will not contact the presser foot, lower the presser foot and continue sewing. Remove the basting stitching. j Select stitch. c No. 1-01 Stitch Loosen the positioning screw on the back of the presser d foot. 1 Positioning screw 1 Slide the presser foot over either the left or right feed e dog. Left sewing position Right sewing position 60