Brother International SE2000 Operation Manual - Page 91
Changing the thread color display, If the thread breaks or the bobbin runs out of, thread during
View all Brother International SE2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Cut the excess thread jumps within the color. i ■ Changing the thread color display You can display the name of the thread colors or embroidery thread number. Memo • Colors on the screen may vary slightly from actual spool colors. • The default thread brand is set to [Original]. Imported embroidery data is displayed with the thread brand specified in the embroidery editing software. Touch and use or to display the following a settings screen. Use or of the menu to select [Name of b Color] or [#123] (thread number). Embroidering ■ If the thread breaks or the bobbin runs out of thread during embroidering Press the "Start/Stop" button to stop the machine. a Touch and thread the upper thread or install the b bobbin thread again. • If the bobbin thread is almost empty, press (Thread cutter button) to cut the upper and bobbin threads, remove the embroidery frame, and then replace the bobbin with one wound with thread. Touch . c Touch , , or to move the needle back the d correct number of stitches before the area where the thread broke, and then touch . • Touch to restart from the beginning. 4 EMBROIDERY • When [Name of Color] is selected, the name of the thread colors is displayed. • When [#123] is selected, the embroidery thread number is displayed. Memo • If you cannot move back to the area where the thread broke, touch to select the color and move to the beginning position of that color, then use , or to move ahead to slightly before where the thread broke. Lower the presser foot and press the "Start/Stop" e button to continue embroidering. ■ Resuming embroidery after turning off the power The current color and stitch number are saved when embroidery is stopped. The next time the machine is turned on, you have the option to continue or delete the pattern. Use or c brand. of the menu to select the thread Memo • The thread brand setting will be applied with the next pattern that is loaded. Touch . d 89