Brother International SE2000 Operation Manual - Page 70

Fagoting, Scallop stitching, Smocking

Get Brother International SE2000 PDF manuals and user guides View all Brother International SE2000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 70 highlights

Utility Stitches After removing the fabric, use the eyelet punch to cut a f hole in the center of the eyelet. • When using the eyelet punch, place thick paper or some other protective sheet under the fabric before punching the hole in the fabric. ■ Fagoting Stitching across an open seam is called "fagoting". It is used on blouses and children's clothing. This stitch is more decorative when thicker thread is used. Use an iron to fold the two pieces of fabric along their a seams. Baste the two pieces of fabric, separated by about 4 b mm (3/16 inch), onto thin paper or a sheet of water- soluble stabilizer. If you draw a line down the middle of the thin paper or water-soluble stabilizer, sewing is easier. 1 Thin paper or water- 3 soluble stabilizer 2 Basting stitching 1 3 4 mm (3/16 inch) ■ Scallop stitching The wave-shaped repeated stitch pattern that looks like shells is called "scalloping". It is used on the collars of blouses and to decorate the edges of projects. Attach monogramming foot "N". a Select stitch. b No. 2-06 Stitch • For details, refer to "Stitch Chart" on page 45. Stitch along the edge of the fabric, making sure not to c sew directly on the edge of the fabric. Trim along the stitches. d 2 Attach zigzag foot "J". c Select a stitch. d No. Stitch 2-12 2-13 • For details, refer to "Stitch Chart" on page 45. Set the stitch width to 7.0 mm (1/4 inch). e Sew with the center of the presser foot aligned along f the center of the two pieces of fabric. • Be careful not to cut the stitches. ■ Smocking The decorative stitch created by stitching or embroidering over gathers is called "smocking". It is used to decorate the front of blouses or cuffs. The smocking stitch adds texture and elasticity to fabric. Attach zigzag foot "J". a Select the straight stitch, and then adjust the stitch b length to 4.0 mm (3/16 inch) and loosen the thread tension. Sew parallel stitching at intervals of 1 cm (3/8 inch) c and pull the bobbin threads to create gathers. Smooth the gathers by ironing them. After sewing is finished, remove the paper. g 68

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
Utility Stitches
68
f
After removing the fabric, use the eyelet punch to cut a
hole in the center of the eyelet.
•
When using the eyelet punch, place thick paper or
some other protective sheet under the fabric before
punching the hole in the fabric.
■
Fagoting
Stitching across an open seam is called “fagoting”. It is
used on blouses and children's clothing. This stitch is
more decorative when thicker thread is used.
a
Use an iron to fold the two pieces of fabric along their
seams.
b
Baste the two pieces of fabric, separated by about 4
mm (3/16 inch), onto thin paper or a sheet of water-
soluble stabilizer.
If you draw a line down the middle of the thin paper or
water-soluble stabilizer, sewing is easier.
c
Attach zigzag foot “J”.
d
Select a stitch.
•
For details, refer to “Stitch Chart” on page 45.
e
Set the stitch width to 7.0 mm (1/4 inch).
f
Sew with the center of the presser foot aligned along
the center of the two pieces of fabric.
g
After sewing is finished, remove the paper.
■
Scallop stitching
The wave-shaped repeated stitch pattern that looks like
shells is called “scalloping”. It is used on the collars of
blouses and to decorate the edges of projects.
a
Attach monogramming foot “N”.
b
Select stitch.
•
For details, refer to “Stitch Chart” on page 45.
c
Stitch along the edge of the fabric, making sure not to
sew directly on the edge of the fabric.
d
Trim along the stitches.
•
Be careful not to cut the stitches.
■
Smocking
The decorative stitch created by stitching or embroidering
over gathers is called “smocking”. It is used to decorate
the front of blouses or cuffs.
The smocking stitch adds texture and elasticity to fabric.
a
Attach zigzag foot “J”.
b
Select the straight stitch, and then adjust the stitch
length to 4.0 mm (3/16 inch) and loosen the thread
tension.
c
Sew parallel stitching at intervals of 1 cm (3/8 inch)
and pull the bobbin threads to create gathers.
Smooth the gathers by ironing them.
1
Thin paper or water-
soluble stabilizer
2
Basting stitching
3
4 mm (3/16 inch)
No.
2-12
2-13
Stitch
2
1
3
No.
2-06
Stitch