Brother International SE2000 Operation Manual - Page 67
Satin stitching using the sewing speed, controller
View all Brother International SE2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
Hold the quilting foot in place with your right hand, e and tighten the presser foot holder screw using the screwdriver with your left hand. 1 Presser foot holder screw CAUTION • Be sure to securely tighten the screws with the included screwdriver. Otherwise, the needle may hit the quilting foot. The needle may break, possibly resulting in injury. Use both hands keeping the fabric taut, and then f move the fabric at a consistent pace in order to sew uniform stitches roughly 2.0 mm - 2.5 mm (approx. 1/16 inch - 3/32 inch) in length. 1 Stitch a After sewing is finished, slide the feed dog position g switch lever to (to the right as seen from the rear of the machine) and turn the handwheel to raise the feed dogs. Utility Stitches ■ Satin stitching using the sewing speed controller A decorative stitch can be sewn by changing the stitch width of a satin stitch. If the machine is set so that the stitch width can be adjusted using the sewing speed controller, the stitch width can quickly and easily be adjusted. When this function is set, the foot controller must be used to sew. Connect the foot controller. a Attach zigzag foot "J". b Touch and set [Width Control] (page 1 of the c settings screen) to [ON]. 3 The machine is now set so that the stitch width can be controlled with the sewing speed controller. The screen appears as shown below. VARIOUS STITCHES Select stitch. d No. 1-33 Stitch • For details, refer to "Stitch Chart" on page 45. Memo • Although the stitching results differ depending on the type of fabric being sewn and the thickness of the thread being used, for best results, adjust the stitch length to between 0.3 and 0.5 mm (1/64 and 1/32 inch). While sewing, slide the sewing speed controller to e adjust the stitch width. • Adjust the sewing speed with the foot controller. 1 Narrower 2 Wider a b When you are finished sewing, set [Width Control] f back to [OFF]. 65